ZF 4646.155.012 POWER TAKE-OFF for WG260 | OEM Genuine Part

Genuine ZF POWER TAKE-OFF (Part No. 4646.155.012). This part fits: 3 WG 260, 4 WG 260, 4 WG 260(1), 4 WG 260(2), 4 WG 260(4) and 3 more models. Also referenced as: 4646155012 / 4646.155.012 / 4646 155 012.

Overview

The ZF 4646.155.012 POWER TAKE-OFF is an OEM genuine component engineered specifically for the WG 260 Series transmission. This unit transfers engine torque to auxiliary hydraulic systems, such as pumps for dump bodies or winches, by engaging directly with the transmission’s internal gearing. As a critical interface between the drivetrain and secondary equipment, the SKU 4646.155.012 ensures precise power distribution without compromising transmission integrity. It mounts to the PTO aperture on the 4646101169: TRANSMISSION HOUSING, forming a sealed assembly that withstands high torque loads.

Symptoms of Failure

When the 4646.155.012 begins to wear, operators may notice these specific failure indicators:

  • Oil seepage at the PTO mounting flange – A common sign of degraded seals, often leading to low transmission fluid levels and overheating.
  • Gear slipping under load – Worn internal splines or bearings cause intermittent power loss to auxiliary equipment, especially during heavy lifting.
  • Unusual grinding or whining noise – Metallic sounds during engagement indicate damaged gear teeth or insufficient lubrication.
  • Difficulty engaging or disengaging the PTO – Sticking shift mechanisms or hydraulic pressure loss prevent smooth operation.

Technical Specifications

Parameter Value
Part Number 4646.155.012
Material High-strength alloy steel (case-hardened)
Weight 4.2 kg (9.3 lbs)
Dimensions (L x W x H) 210 mm x 140 mm x 110 mm
OEM Reference ZF 4646.155.012
Torque Capacity 450 Nm (332 ft-lbs)
Mounting Bolts 0636115293: 螺栓 (4x M12)
Seal Kit 0634316523: O-RING

Compatibility

This POWER TAKE-OFF is designed for the ZF WG 260 Series, but it also fits select models in the WG 180, WG 200, and WG 250 families due to shared PTO aperture dimensions. It integrates with the 4646201003: POT for hydraulic control and requires the 0736300232: 螺栓 for secure fastening. Always verify housing compatibility with your transmission’s serial number before installation.

Related Components

Part Number Name Function
4646101169 TRANSMISSION HOUSING Main structural casing for gear sets
0636115293 螺栓 Mounting bolt for PTO flange
4646201003 POT Hydraulic pressure control valve
0736300232 螺栓 Fastener for PTO shift mechanism
4475280208 SCREW PLUG Seals oil passages in housing
0634316523 O-RING Prevents fluid leaks at joints
4646108006 COUNTERSHAFT Transfers torque between gears
4646109016 PARKING BRAKE Locks output shaft when stationary
0501008365 DISC BRAKE Friction-based braking system
0501207633 BRAKE CALIPER Holds brake pads against disc

Authorized ZF Distributor

We are a certified supplier of genuine ZF components.

ZF Official Authorization Certificate
Transmission Fitment

ZF 3 WG 260, ZF 4 WG 260, ZF 4 WG 260(1), ZF 4 WG 260(2), ZF 4 WG 260(4), ZF 5 WG 260, ZF 6 WG 260, ZF 6 WG 260(4)