Overview
The ZF 6073.023.309 TCU ERGOPOWER M EC3A is a critical electronic control unit specifically engineered for the WG 171 series transmission. This OEM genuine part governs shift timing, clutch modulation, and diagnostic communication within the transmission assembly. Positioned directly on the valve body, the TCU interprets driver commands and sensor data to ensure precise gear engagement. The SKU 6073.023.309 is the exact replacement for factory-installed units, guaranteeing seamless integration with your existing TRANSMISSION HOUSING and internal hydraulic circuits.
Symptoms of Failure
- Erratic shifting or gear hunting: A failing TCU often causes the transmission to randomly upshift or downshift without driver input, especially under load.
- Delayed engagement or no forward/reverse: When the control unit loses communication with solenoids, you may experience a significant lag when shifting from Neutral to Drive or Reverse.
- Transmission stuck in limp mode: The system will lock into a single gear (typically 3rd or 4th) to protect internal components, accompanied by a check-engine or transmission warning light.
- Intermittent loss of power to the display: A degraded TCU can cause the gear indicator on the dashboard to flicker or go blank entirely.
Technical Specifications
| Specification | Value |
|---|---|
| OEM Part Number | 6073.023.309 |
| Material | High-grade aluminum alloy housing with conformal-coated PCB |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 45 mm |
| Operating Voltage | 24V DC (nominal) |
| Operating Temperature Range | -40°C to +85°C |
| OEM Reference | ZF ERGOPOWER M EC3A |
Compatibility
This TCU is primarily designed for the WG 171 Series transmission. Based on its architecture and connector layout, it is also compatible with the WG 180, WG 200, and WG 211 series transmissions used in medium-duty trucks and construction equipment. Always verify the connector pinout against your existing unit before installation. The TCU works in conjunction with the HOUS.FRONT SECT and the SCREEN SHEET to filter hydraulic fluid entering the control module.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101072 | TRANSMISSION HOUSING | Main structural casing that encloses all gear sets and shafts. |
| 4656301168 | HOUS.FRONT SECT | Front section of the housing that supports the torque converter and pump. |
| 4656201015 | SCREEN SHEET | Fine mesh filter that prevents debris from entering the valve body. |
| 4656301037 | TUBE | Hydraulic fluid passage tube connecting the pump to the cooler circuit. |
| 0634313514 | O-RING | Seals fluid connections to prevent external leaks. |
| 0636100803 | CAP SCREW | Fastener used to secure the TCU mounting bracket. |
| 4656301169 | HOUSING REAR PART | Rear housing section that encloses the output shaft and speed sensors. |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for precise positioning of housing sections. |
| 0636100801 | CAP SCREW | Bolt for attaching the valve body to the housing. |
| 0636100160 | CAP SCREW | Fastener for securing the oil pan to the transmission. |
Frequently Asked Questions
Q: Can I install this TCU without replacing the TUBE and O-rings?
It is strongly recommended to replace the O-ring (0634313514) and inspect the TUBE for cracks during TCU replacement, as hydraulic contamination is a common cause of TCU failure.
Q: How do I know if my WG 171 transmission needs this specific TCU?
Check the existing part number on your unit. If it matches 6073.023.309, this is a direct OEM replacement. If the connector has 48 pins and the housing is marked “EC3A,” it is compatible.
Q: Does this TCU require programming after installation?
Yes. The unit must be calibrated to the specific transmission using ZF diagnostic software. It will not function correctly if simply swapped without parameterization.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
