Overview
The ZF 0899.317.069 GASKET is a precision-engineered sealing component designed for the WG160, WG190, WG210, and WG211 series transmissions. This OEM genuine part sits at critical mating interfaces within the transmission housing assembly, ensuring a leak-proof seal between the TRANSMISSION HOUSING and adjacent sections. By maintaining proper oil containment and pressure integrity, the SKU 0899.317.069 prevents contamination ingress and fluid loss, directly supporting the durability of internal gears and clutches. This gasket is a factory-specified replacement for routine overhauls or when addressing oil seepage in heavy-duty ZF drivetrains.
Symptoms of Failure
- External oil leaks at housing joints: A degraded 0899.317.069 gasket often causes visible wet spots or drips around the transmission housing split lines, particularly near the HOUS.FRONT SECT interface.
- Low transmission fluid levels without visible damage: Internal weeping through a worn gasket can lead to gradual fluid loss, triggering low-pressure warnings or erratic gear engagement.
- Contaminated oil or sludge buildup: A failing seal allows dirt and moisture to enter the gear train, resulting in dark, gritty fluid that accelerates wear on bearings and synchronizers.
- Intermittent gear slipping under load: Pressure loss from a compromised gasket can cause clutch pack slippage, especially during torque-heavy operations in WG190 or WG210 units.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 0899.317.069 |
| Material | Nitrile rubber (NBR) with fiber reinforcement |
| Thickness | 1.5 mm (estimated) |
| Outer Diameter | 210 mm (estimated) |
| Inner Diameter | 185 mm (estimated) |
| Weight | 0.08 kg |
| Operating Temperature Range | -40°C to +120°C |
| OEM Reference | ZF 0899.317.069 |
Compatibility
This gasket is specifically engineered for ZF WG160, WG190, WG210, and WG211 series transmissions. It is also compatible with the WG180 and WG200 variants when used at the same housing interface. The part seals the joint between the HOUSING REAR PART (4656201035) and the main housing, and is also applicable to the HOUSING REAR PART (4472239178) found in later production runs. Always verify the exact mating surface geometry before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101037 | TRANSMISSION HOUSING | Main structural casing for gear and clutch assembly |
| 4656201075 | HOUS.FRONT SECT | Front section housing for input shaft and bearings |
| 4656201035 | HOUSING REAR PART | Rear housing section for output shaft support |
| 4472239178 | HOUSING REAR PART | Alternate rear housing variant for specific WG models |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for precise housing positioning |
| 4656301148 | FIXING PLATE | Secures gasket and prevents lateral movement |
| 0636100817 | CAP SCREW | Fastener for housing-to-gasket clamping |
| 4656301016 | SCREEN SHEET | Filter screen for oil return passages |
| 4656301017 | SCREEN SHEET | Secondary filter screen for high-flow circuits |
| 0636100803 | CAP SCREW | Alternate thread-length fastener for rear housings |
Frequently Asked Questions
Q: Can I reuse the 0899.317.069 gasket after disassembly?
No. This is a single-use crush gasket. Reusing it will almost certainly cause leaks. Always install a new OEM gasket during any housing separation.
Q: Does this gasket fit the ZF WG211 transmission?
Yes. The 0899.317.069 is listed as compatible with the WG211 series. However, verify that your housing interface uses the same bolt pattern as the WG210.
Q: What torque should I apply to the housing bolts when installing this gasket?
ZF recommends 45 Nm for M10 cap screws (like 0636100817) and 25 Nm for M8 fasteners. Always consult your service manual for exact values.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 0899.317.069 GASKET – Gasket RFQ Support
PartsZF helps B2B buyers source ZF 0899.317.069 GASKET with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This gasket page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 0899.317.069 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Documentation reference: 4657023003
- Documentation reference: 4657054061
- Documentation reference available for RFQ review
- Documentation reference: 4656055002
- Illustration section: CONTROL UNIT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 0899.317.069 |
|---|---|
| Normalized SKU | 0899317069 |
| Part name | GASKET |
| Product category | gasket |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: diagram. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4656.306.157 GASKET
- ZF 4656.306.158 GASKET
- ZF 4642.331.216 GASKET
- ZF 4657.306.104 GASKET
- ZF 4644.306.584 GASKET
