Overview
The ZF 0630.501.212 RETAINING RING is a critical OEM genuine component engineered for the WG160 and related heavy-duty transmission series. This precision-formed ring secures internal shaft assemblies and gear clusters within the planetary gear set, preventing axial displacement during high-torque operation. As a factory-specified part, the SKU 0630.501.212 ensures exact fitment and load distribution, working in concert with the TRANSMISSION HOUSING to maintain proper gear alignment. Its placement between the HOUS.FRONT SECT and the HOUSING REAR PART makes it indispensable for maintaining drivetrain integrity in ZF WG-series transmissions.
Symptoms of Failure
- Oil leaks near the transmission housing joint: A worn or fatigued retaining ring allows shaft movement, breaking the seal between the HOUSING REAR PART and the main casing, leading to visible fluid seepage.
- Gear slipping under load: When the ring loses its clamping force, planetary gears can shift axially, causing intermittent power loss during acceleration or hill climbs.
- Unusual grinding or clicking noises: Metal-on-metal contact occurs when the retaining ring fails to hold bearings in place, producing audible distress from the transmission sump.
- Hard shifting or delayed engagement: Axial play from a degraded ring disrupts clutch pack alignment, resulting in rough gear changes and hesitation when shifting from neutral to drive.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number (OEM) | 0630.501.212 |
| Material | Spring steel (C67S) with phosphate coating |
| Inner Diameter | 130 mm (estimated) |
| Outer Diameter | 145 mm (estimated) |
| Thickness | 3.5 mm (estimated) |
| Weight | 0.12 kg (estimated) |
| OEM Reference | ZF 0630.501.212 |
Compatibility
This retaining ring is engineered for ZF WG-series transmissions, including the WG160, WG190, WG191, WG210, WG211, and WG230 models. It is also commonly specified for the WG180 and WG200 series where axial retention of planetary gear sets is required. Always verify fitment with your transmission serial number before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101037 | TRANSMISSION HOUSING | Encloses and supports all internal gear assemblies |
| 4656201075 | HOUS.FRONT SECT | Front section of the transmission housing, aligns input shaft |
| 4656201035 | HOUSING REAR PART | Rear housing section, supports output shaft and bearings |
| 4472239178 | HOUSING REAR PART | Alternate rear housing variant for specific WG series |
| 0631306816 | CYLINDRICAL PIN | Locates and aligns housing sections during assembly |
| 4656301148 | FIXING PLATE | Secures retaining ring and prevents rotational movement |
| 0636100817 | CAP SCREW | Fastens housing sections with high tensile strength |
| 4656301016 | SCREEN SHEET | Filters debris from transmission fluid circulation |
| 4656301017 | SCREEN SHEET | Alternate mesh screen for high-flow oil systems |
| 0636100803 | CAP SCREW | M10 bolt for securing retaining ring and cover plates |
Frequently Asked Questions
Q: Can I reuse the ZF 0630.501.212 retaining ring after disassembly?
A: No. This is a single-use component designed to deform slightly during installation. Reusing it compromises clamping force and risks internal damage. Always replace with a new OEM ring.
Q: How do I know if my WG160 transmission needs this retaining ring?
A: If you experience oil leaks at the housing seam or hear metallic rattling from the planetary section, inspect the ring. It is commonly replaced alongside the HOUSING REAR PART during a full rebuild.
Q: Is this ring compatible with the ZF WG210 series?
A: Yes, the 0630.501.212 is listed for WG210 and WG211 models. However, verify your transmission tag to ensure the housing variant matches the HOUS.FRONT SECT configuration.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
