ZF 4657.024.140 4 WG 190 Powershift Transmission Assembly | Complete Unit

ZF 4 WG 190 Powershift Transmission (Part No. 4657.024.140) — Complete factory-assembled unit from the WG 190/WG 210 family. This is a genuine ZF powershift transmission, manufactured by ZF Friedrichshafen AG for heavy construction equipment including wheel loaders, graders, and dozers. Supplied as a complete, ready-to-install assembly. Also referenced as: 4657024140 / 4657.024.140 / 4657 024 140.

Overview

This ZF 4657.024.140 4 WG 190 Powershift Transmission Assembly is a complete, fully assembled unit designed for heavy-duty off-highway machinery. As a core component of the WG 190 Series, this assembly integrates the main gear train, clutch packs, and hydraulic control system into a single, ready-to-install package. The SKU 4657.024.140 serves as the central power transfer module, connecting the engine to the driveline in wheel loaders, dozers, and graders. It is engineered to handle high torque loads while providing smooth, reliable shifting under extreme operating conditions.

Symptoms of Failure

  • Delayed or harsh gear engagement: When the internal clutch packs or valve body wear out, operators experience a noticeable lag or jarring shift between forward and reverse gears.
  • Transmission fluid leaks at the housing seams: Cracks or warping in the TRANSMISSION HOUSING or HOUS.FRONT SECT allow hydraulic oil to escape, leading to pressure loss and overheating.
  • Loss of power under load: Worn internal components cause the transmission to slip, resulting in reduced tractive effort when pushing or lifting heavy materials.
  • Unusual whining or grinding noises: Bearing failure or gear tooth damage within the assembly produces audible metallic sounds during operation.

Technical Specifications

Parameter Value
OEM Part Number 4657.024.140
Series WG 190 (4 WG 190)
Type Powershift Transmission Assembly (Complete Unit)
Dry Weight (approx.) 385 kg (849 lbs)
Overall Length 720 mm
Overall Width 510 mm
Overall Height 580 mm
Housing Material High-Strength Cast Iron
OEM Reference ZF 4657.024.140
Related Fastener CAP SCREW (0636100801)
Related Fastener CAP SCREW (0636100803)
Related Pin CYLINDRICAL PIN (0631306816)

Compatibility

This complete unit is specifically engineered for the ZF WG 190 series of powershift transmissions. It is directly compatible with the 4 WG 190 variant. While the core assembly is unique to the WG 190, the housing components it integrates with—such as the HOUSING REAR PART and the HOUSING REAR SECTION—are shared across the WG 180, WG 200, and WG 210 model families. Always verify your transmission model number before ordering.

Related Components

Part Number Name Function
4657101078 TRANSMISSION HOUSING Main structural casing for the gear train
4657201166 HOUS.FRONT SECT Front section housing for input shaft and pump drive
4657201168 HOUSING REAR PART Rear housing section for output shaft support
4657298101 HOUSING REAR SECTION Additional rear housing segment for PTO mounting
0631306816 CYLINDRICAL PIN Alignment pin for housing assembly
0636100801 CAP SCREW M10 fastener for housing joints
4656301148 FIXING PLATE Retaining plate for clutch pack assembly
4657301032 SCREEN SHEET Fine mesh filter for hydraulic circuit
4657301033 SCREEN SHEET Coarse mesh pre-filter for oil sump
0636100803 CAP SCREW M12 fastener for rear housing sections

Frequently Asked Questions

Q: Is the ZF 4657.024.140 a direct replacement for a 4 WG 190 transmission?
A: Yes, this is the complete assembly unit for the 4 WG 190 series. It includes all internal components and is designed as a drop-in replacement for the original factory unit.

Q: Can I install this unit without replacing the housing sections?
A: While the assembly is complete, we strongly recommend inspecting the TRANSMISSION HOUSING and HOUS.FRONT SECT for cracks or wear. Damaged housings can compromise the new assembly’s performance.

Q: What is the typical lifespan of this assembly in a wheel loader?
A: With proper maintenance and clean hydraulic fluid, the 4657.024.140 can last 8,000 to 12,000 operating hours before requiring a rebuild. Harsh applications may reduce this interval.

📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →

Transmission Fitment

ZF 4 WG 190

WA WhatsApp