Overview
The ZF 4657.231.024 OIL DIPSTICK is a precision-engineered component designed exclusively for the WG210 series transmission. This genuine OEM part allows operators and technicians to accurately measure transmission fluid levels, ensuring optimal lubrication and hydraulic pressure within the gearbox. Positioned directly on the transmission housing, the dipstick provides a critical interface for routine maintenance checks. The SKU 4657.231.024 is manufactured to ZF’s exacting tolerances, guaranteeing a secure seal and reliable fluid level readings throughout the service life of your transmission.
Symptoms of Failure
When the ZF 4657.231.024 oil dipstick begins to wear, operators may notice several distinct failure indicators. Transmission fluid leaks around the dipstick tube are the most common symptom, often caused by a degraded O-ring or cracked handle. Inaccurate fluid level readings can lead to overfilling or underfilling, resulting in erratic shifting or overheating. Gear slipping under load may occur if the dipstick fails to seal properly, allowing contaminants into the system. Additionally, visible oil residue on the dipstick handle or surrounding housing signals that the part requires immediate replacement to prevent further drivetrain damage.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number | 4657.231.024 |
| Material | High-grade steel with corrosion-resistant coating |
| Overall Length | Approx. 320 mm |
| Weight | 0.15 kg |
| OEM Reference | ZF 4657.231.024 |
| Seal Type | Integrated O-ring (replaceable) |
Compatibility
This genuine ZF oil dipstick is primarily designed for the WG210 series transmission. Based on its design and mounting interface, it is also compatible with the WG180, WG200, and WG250 series models that share the same housing architecture. Always verify your transmission model and housing configuration before installation. The dipstick integrates directly with the 4657101033: TRANSMISSION HOUSING and the 4657201027: HOUS.FRONT SECT to ensure proper alignment. For complete assembly, it works alongside the 4657201012: HOUSING REAR PART and is secured using the 0631306792: CYLINDRICAL PIN.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101033 | TRANSMISSION HOUSING | Main structural casing for gear assembly |
| 4657201027 | HOUS.FRONT SECT | Front section of the transmission housing |
| 4657201012 | HOUSING REAR PART | Rear section of the transmission housing |
| 0631306792 | CYLINDRICAL PIN | Alignment pin for housing sections |
| 0636100801 | CAP SCREW | Fastener for securing housing components |
| 4656301148 | FIXING PLATE | Mounting plate for internal components |
| 4657301032 | SCREEN SHEET | Fine mesh filter for oil circulation |
| 4657301033 | SCREEN SHEET | Coarse mesh filter for oil circulation |
| 0636100803 | CAP SCREW | Fastener for oil pan or cover |
| 4681301040 | OIL FEED.HOUSG. | Oil supply housing for lubrication circuit |
Frequently Asked Questions
Q: How do I know if the 4657.231.024 dipstick is compatible with my WG210 transmission?
A: Check the transmission model plate on the housing. This dipstick fits WG210, WG180, WG200, and WG250 series. If your housing uses the same mounting boss and tube diameter, it is compatible.
Q: Can I replace just the O-ring on this dipstick, or do I need the whole assembly?
A: While the O-ring is replaceable, ZF recommends using the complete 4657.231.024 assembly to ensure proper sealing and accurate readings. The handle and tube can degrade over time, leading to leaks.
Q: What torque should I use when installing the dipstick?
A: Hand-tighten the dipstick until the O-ring seats firmly. Do not use tools, as overtightening can damage the seal or housing threads. Refer to your ZF service manual for specific torque values if a locking mechanism is present.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
