Overview
The ZF 2093.110.001 P.T.O. SHAFT is a critical power take-off component engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part serves as the primary rotational link that transfers engine torque from the transmission housing to auxiliary hydraulic pumps or driven equipment. Positioned within the gear train assembly, this shaft engages directly with the 5838109012: DIFFERENTIAL to ensure seamless power distribution. The SKU 2093.110.001 is precision-machined to OEM tolerances, guaranteeing exact fitment and reliable performance under continuous heavy-load conditions.
Symptoms of Failure
- Intermittent PTO engagement failure: When the shaft splines wear unevenly, the power take-off may fail to engage or disengage properly, often accompanied by a grinding noise during activation.
- Oil seepage from the PTO housing: A worn shaft seal surface allows transmission fluid to leak past the housing, leaving visible drips beneath the vehicle and causing gradual fluid loss.
- Vibration during auxiliary equipment operation: Bent or fatigued shafts produce noticeable vibration through the driveline, particularly when operating hydraulic pumps at high RPM.
- Metal debris in transmission fluid: Advanced wear on the shaft splines or bearing journals sheds metallic particles into the oil, which can be detected during routine fluid changes.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number / SKU | 2093.110.001 |
| Overall Length | 285 mm (estimated) |
| Shaft Diameter | 35 mm (estimated) |
| Spline Count | 14-tooth involute spline |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 1.85 kg (estimated) |
| OEM Reference | ZF 2093.110.001 |
| Surface Treatment | Black oxide corrosion resistant |
Compatibility
This genuine ZF P.T.O. shaft is designed for direct installation in the following transmission models: WG100, WG130, and WG131. It also fits select variants of the WG180 and WG200 series when used with the appropriate 5838300626: DIFFERENTIAL HOUSING. For optimal assembly, always pair this shaft with a new 0750117075: TAPER ROLLER BEARING to maintain proper axial preload. The shaft also interfaces with the 2093209023: DIFFERENTIAL assembly for synchronized power take-off operation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for PTO output |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures shaft alignment in bore |
| 5838300811 | THRUST WASHER | Controls axial end-play clearance |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 5838300633 | AXLE | Drives wheel hub assembly |
| 5838300753 | THRUST WASHER | Reduces friction on gear faces |
| 5838300818 | THRUST WASHER | Supplementary axial load distribution |
Frequently Asked Questions
Q: Can the 2093.110.001 shaft be used in a WG180 transmission?
A: Yes, this P.T.O. shaft is compatible with WG180 transmissions when the correct differential housing and bearing preload specifications are followed. Always verify spline alignment with your specific housing variant.
Q: What causes premature wear on this P.T.O. shaft?
A: The most common cause is inadequate lubrication due to low transmission fluid levels or contaminated oil. Additionally, misalignment of the PTO pump mounting can induce bending stress on the shaft splines, accelerating fatigue failure.
Q: Should I replace the taper roller bearing at the same time?
A: Absolutely. The 0750117075: TAPER ROLLER BEARING wears concurrently with the shaft and must be replaced to prevent premature failure of the new P.T.O. shaft. Reusing an old bearing can introduce misalignment and reduce service life by up to 60%.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.110.001 P.T.O. SHAFT – Shaft RFQ Support
PartsZF helps B2B buyers source ZF 2093.110.001 P.T.O. SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shaft page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.110.001 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: T 7226 L
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.110.001 |
|---|---|
| Normalized SKU | 2093110001 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.141 INPUT SHAFT
- ZF 4646.323.010 OUTPUT SHAFT
- ZF 4646.304.069 OUTPUT SHAFT
- ZF 4646.304.065 QUILL SHAFT
- ZF 4657.354.010 INPUT SHAFT
