Overview
The ZF 5838.300.737 TYPE PLATE is a critical identification and sealing component mounted directly onto the transmission housing of heavy-duty construction machinery. This OEM genuine part serves as the primary data plate for the gearbox assembly, ensuring that all operational specifications, serial numbers, and maintenance codes remain legible and protected from environmental contaminants. The 5838.300.737 type plate sits flush against the transmission casing, acting as a barrier against dirt ingress while providing essential reference data for service technicians. When replacing this component, it is common to inspect the 5838300626: DIFFERENTIAL HOUSING for any signs of wear or corrosion that may have compromised the original plate’s seal.
Symptoms of Failure
- Oil seepage around the transmission casing – A degraded or cracked type plate allows lubricant to escape, leading to low fluid levels and potential gear damage.
- Illegible transmission identification numbers – When the plate becomes corroded or delaminated, service teams cannot verify the correct ZF model, causing delays in parts ordering and repair.
- Vibration-induced loosening – Over time, the mounting rivets or adhesive fail, causing the plate to rattle against the housing and accelerate wear on the 0750117075: TAPER ROLLER BEARING due to misalignment.
- Contaminant ingress – A missing or warped type plate allows dust and moisture to enter the transmission, directly affecting the 5838109009: DIFFERENTIAL assembly’s performance.
Technical Specifications
| Specification | Value |
|---|---|
| OEM Part Number | 5838.300.737 |
| Material | Anodized aluminum with adhesive backing |
| Dimensions (L x W x H) | 120 mm x 80 mm x 2 mm |
| Weight | 0.05 kg |
| OEM Reference | ZF Friedrichshafen AG |
| Mounting Type | Rivet or adhesive (OEM spec) |
Compatibility
This type plate is designed for ZF WG-series transmissions commonly found in construction machinery, including the WG180, WG200, and WG210 models. It is also compatible with select off-highway transmissions used in loaders and graders. For optimal fitment, always verify the plate’s orientation against the 2093209023: DIFFERENTIAL mounting points on your specific unit.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109009 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shaft loads |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gears |
| 0631329088 | SPRING PIN | Secures alignment of components |
| 5838300811 | THRUST WASHER | Reduces axial friction |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 5838300633 | AXLE | Transmits rotational force |
| 5838300753 | THRUST WASHER | Controls axial play |
| 5838300818 | THRUST WASHER | Prevents gear contact wear |
Frequently Asked Questions
Q: Can I install this type plate without removing the transmission?
Yes, the 5838.300.737 is a surface-mounted component accessible from the exterior of the housing. However, ensure the mounting area is clean and free of debris to maintain a proper seal.
Q: Will a damaged type plate affect transmission performance?
While the plate itself does not engage moving parts, a compromised seal can lead to oil loss and contamination. This directly impacts the 5838109009: DIFFERENTIAL and other internal assemblies over time.
Q: How do I verify this plate fits my ZF WG200 transmission?
Cross-reference the OEM part number on your existing plate. The 5838.300.737 is the direct replacement for all WG180, WG200, and WG210 variants used in construction machinery.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
