Overview
The ZF 5838.110.010 P.T.O. Shaft is a critical power take-off component engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or driven equipment. Positioned within the PTO housing assembly, the shaft interfaces directly with the 5838109009: DIFFERENTIAL and the 2093209023: DIFFERENTIAL to ensure synchronized torque delivery. The SKU 5838.110.010 is precision-machined to ZF’s original tolerances, guaranteeing a direct fit without modification.
Symptoms of Failure
When the ZF 5838.110.010 P.T.O. Shaft begins to wear, operators often notice distinct operational issues. Look for these specific failure symptoms:
- Intermittent PTO engagement failure: The shaft may slip under load, causing auxiliary equipment to stop unexpectedly during operation.
- Metallic grinding noise from the PTO housing: Worn splines or bearing surfaces produce a distinct chatter, especially when engaging or disengaging the PTO.
- Oil seepage around the PTO mounting flange: A damaged shaft seal surface allows transmission fluid to leak, reducing lubrication to the 0750117075: TAPER ROLLER BEARING.
- Vibration in the driveline at idle: An unbalanced or bent shaft transmits harmonics through the transmission case, felt in the cab or chassis.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number (SKU) | 5838.110.010 |
| Overall Length | 185 mm (estimated) |
| Spline Diameter | 28 mm (10-spline, 30° pressure angle) |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 1.2 kg (2.65 lbs) |
| OEM Reference | ZF 5838.110.010 (Genuine) |
| Surface Treatment | Black oxide with phosphate undercoat |
Compatibility
This P.T.O. shaft is designed for ZF’s WG-series powershift transmissions. It is a direct replacement in the following models:
- ZF WG100 (all variants)
- ZF WG130 (including WG131)
- ZF WG180 (with adapter sleeve, verify housing)
- ZF WG200 (limited compatibility, check spline count)
For proper installation, ensure the 5838300626: DIFFERENTIAL HOUSING is free of debris and the mating surfaces are clean. Always replace the 0750117075: TAPER ROLLER BEARING simultaneously to prevent premature wear on the new shaft.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109009 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on shaft |
| 2093209023 | DIFFERENTIAL | Secondary differential for planetary gears |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential assembly |
| 0631329088 | SPRING PIN | Secures shaft to PTO gear |
| 5838300811 | THRUST WASHER | Controls axial clearance |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel ends |
| 5838300633 | AXLE | Driveshaft component |
| 5838300753 | THRUST WASHER | Reduces friction on gear faces |
| 5838300818 | THRUST WASHER | Adjusts differential preload |
Frequently Asked Questions
Q: Can I use the ZF 5838.110.010 shaft in a WG180 transmission without modifications?
A: The shaft is primarily designed for WG100/WG130/WG131 models. For WG180 applications, verify the spline count and housing depth; an adapter sleeve may be required to maintain proper engagement with the 5838109009: DIFFERENTIAL.
Q: What causes premature failure of this P.T.O. shaft?
A: The most common cause is a worn 0750117075: TAPER ROLLER BEARING that allows excessive radial play. Always inspect and replace the bearing when installing a new shaft to avoid rapid spline wear.
Q: Is the 5838.110.010 shaft interchangeable with any aftermarket parts?
A: This is an OEM genuine ZF part with specific heat-treat patterns. Aftermarket shafts often lack the case depth required for heavy-duty cycles. For maximum service life, use only the genuine 5838.110.010 with the matching 5838300626: DIFFERENTIAL HOUSING.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 5838.110.010 P.T.O. SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 5838.110.010 P.T.O. SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 5838.110.010 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 5838.110.010 |
|---|---|
| Normalized SKU | 5838110010 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
