Overview
The ZF 2093.359.094 INTERMEDIATE SHAFT is a critical torque-transfer component engineered for the WG100, WG130, and WG131 transmission series. Positioned between the input shaft and the main output assembly, this OEM genuine part ensures precise gear alignment and smooth power distribution under heavy load. The SKU 2093.359.094 is manufactured to ZF’s exacting tolerances, providing a direct replacement that restores driveline integrity. When paired with a 2093109013: DIFFERENTIAL, the intermediate shaft maintains synchronized rotation across the gearset, reducing vibration and extending service life.
Symptoms of Failure
- Whining or grinding noise during acceleration: Worn splines or bearing journals on the intermediate shaft create audible metal-on-metal contact, often mistaken for gear failure.
- Intermittent gear slipping under load: A fatigued shaft can cause misalignment, leading to partial disengagement of the drive gear and erratic power delivery.
- Oil contamination with metallic debris: Surface spalling on the shaft releases fine metal particles into the transmission fluid, visible during routine oil changes.
- Vibration in neutral or low gear: Imbalance from a bent or worn intermediate shaft transmits through the housing, felt as a low-frequency shudder.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 2093.359.094 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 385 mm |
| Shaft Diameter (bearing seat) | 45 mm |
| Spline Count | 24 involute splines |
| Weight | 3.2 kg |
| OEM Reference | ZF 2093.359.094 |
| Hardness | 58-62 HRC (case depth 0.8 mm) |
Compatibility
This intermediate shaft is specifically designed for ZF’s WG-series powershift transmissions. Verified fitment includes the WG100, WG130, and WG131 models commonly found in agricultural tractors and construction loaders. The 2093.359.094 also supports the WG180 and WG200 series when used with a 0750117075: TAPER ROLLER BEARING for proper axial preload. For differential-side integration, the shaft mates directly with a 2093209096: DIFFERENTIAL and requires a 2093309073: DIFF.HOUSING for complete assembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109013 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209096 | DIFFERENTIAL | Secondary torque split unit |
| 2093309073 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures shaft alignment |
| 0730300820 | THRUST WASHER | Controls axial end-play |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel |
| 5838300811 | THRUST WASHER | Reduces friction on gear faces |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Meshes with axle bevel gear |
Frequently Asked Questions
Q: How do I know if my ZF WG100 intermediate shaft is failing?
A: Listen for a rhythmic clicking or whine that changes with engine RPM. Also check for excessive backlash at the output flange—anything over 0.5 mm of rotational play indicates shaft wear.
Q: Can the 2093.359.094 be reused after a transmission rebuild?
A: ZF recommends replacement if the shaft shows any pitting, scoring, or discoloration from heat. Even minor surface damage can accelerate bearing failure in the 0750117075: TAPER ROLLER BEARING.
Q: What tools are needed to install this intermediate shaft?
A> A bearing puller, torque wrench (capable of 250 Nm), and a soft-faced mallet are essential. Always replace the 0631100223: SPRING PIN during installation to prevent shaft walk.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.359.094 INTERMEDIATE SHAFT – Shaft RFQ Support
PartsZF helps B2B buyers source ZF 2093.359.094 INTERMEDIATE SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shaft page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.359.094 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: POWER SHIFT GROUP
- Illustration section: LASTSCHALTGR
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.359.094 |
|---|---|
| Normalized SKU | 2093359094 |
| Part name | INTERMEDIATE SHAFT |
| Product category | shaft |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: diagram. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.141 INPUT SHAFT
- ZF 4646.323.010 OUTPUT SHAFT
- ZF 4646.304.069 OUTPUT SHAFT
- ZF 4646.304.065 QUILL SHAFT
- ZF 4657.354.010 INPUT SHAFT
