ZF 2093.011.002 T 7224 L | OEM Genuine Part

Overview

The ZF 2093.011.002 T 7224 L is an OEM genuine differential assembly engineered for heavy-duty construction machinery transmissions. This critical component sits within the final drive housing of ZF powershift transmissions, where it distributes torque from the driveshaft to the axle shafts while allowing for speed differentiation between wheels during turns. The SKU 2093.011.002 is precision-machined to OEM tolerances, ensuring seamless integration with the planetary gear set and axle bevel gear. When paired with the 2093109018: DIFFERENTIAL and the 5838300626: DIFFERENTIAL HOUSING, this part forms the core of the load-sharing assembly that withstands extreme axial and radial loads in excavators and wheel loaders.

Symptoms of Failure

When the ZF 2093.011.002 differential wears out, operators typically notice three to four distinct failure symptoms. First, a low-speed grinding noise from the axle housing indicates worn gear teeth or bearing surfaces. Second, uneven tire wear combined with difficulty turning on loose terrain signals differential lock failure or internal gear slippage. Third, oil leaks around the axle flange often accompany a failing differential housing seal. Fourth, vibration during straight-line travel suggests the differential carrier has developed excessive play, which can accelerate wear on the 0750117075: TAPER ROLLER BEARING and the 2093209023: DIFFERENTIAL.

Technical Specifications

Compatibility

This genuine ZF differential is designed for use in the following transmission models: ZF WG180, ZF WG200, ZF WG210, and ZF WG220 series. It is also compatible with certain ZF 4WG-200 and ZF 6WG-250 powershift transmissions found in Caterpillar, Volvo, and Komatsu construction machinery. Always verify the axle housing configuration before installation, as the 5838300626: DIFFERENTIAL HOUSING must match the spline count of this unit.

Related Components

Frequently Asked Questions

Q: Can the ZF 2093.011.002 be used in a ZF WG180 transmission?
A: Yes, this differential is a direct OEM replacement for WG180, WG200, and WG210 series transmissions. Verify the axle housing part number matches your unit.

Q: What causes premature failure of this differential?
A: Common causes include contaminated lubricant, improper backlash adjustment, or a worn 0750117075: TAPER ROLLER BEARING that allows excessive carrier movement.

Q: Is the 2093.011.002 supplied with thrust washers?
A: No, this is the bare differential assembly. You will need separate 5838300811: THRUST WASHER and 5838300818: THRUST WASHER components for proper installation.