Overview
The ZF 2093.210.034 COVER is a critical sealing and structural component designed for heavy-duty construction machinery transmissions. This OEM genuine part encloses the differential housing assembly, protecting internal gears and bearings from contaminants while maintaining proper oil pressure. Positioned on the rear or side of the transmission case, the cover ensures the integrity of the lubrication system and supports the differential carrier. The SKU 2093.210.034 is precision-engineered to ZF’s exacting tolerances, making it essential for reliable operation in excavators, wheel loaders, and graders. When installed alongside a 2093109024: DIFFERENTIAL, this cover forms a sealed chamber that prevents debris ingress and oil loss, directly impacting transmission longevity.
Symptoms of Failure
When the ZF 2093.210.034 cover wears or cracks, operators may notice these specific failure signs:
- Oil leaks around the differential housing: A cracked or warped cover often causes visible seepage at the mating surface, leading to low fluid levels and overheating.
- Gear slipping under load: Loss of oil pressure from a compromised cover can cause insufficient lubrication to the 0750117075: TAPER ROLLER BEARING, resulting in erratic gear engagement.
- Unusual whining or grinding noises: Contaminants entering through a damaged cover accelerate wear on internal components, producing metallic sounds during operation.
- Reduced differential performance: A failing cover may allow misalignment of the 2093209095: DIFFERENTIAL, causing uneven torque distribution and vibration.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2093.210.034 |
| Material | High-grade cast iron (GGG-40) |
| Weight | 2.8 kg (6.2 lbs) |
| Outer Diameter | 210 mm |
| Bolt Hole Pattern | 8 x M12 on 180 mm PCD |
| OEM Reference | ZF 2093.210.034 |
| Seal Type | Integrated lip seal (dual-lip design) |
Compatibility
This cover is engineered for ZF’s heavy-duty transmission families commonly used in construction machinery. It is a direct fit for the WG180, WG200, and WG210 series, as well as select Ecomat models (e.g., 4HP22, 5HP30) when paired with the correct differential housing. The 2093309071: DIFF.HOUSING must be inspected for wear during installation to ensure proper sealing. Always verify your transmission model’s serial number before ordering, as variations exist between off-highway and on-road applications.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109024 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports differential shaft rotation |
| 2093209095 | DIFFERENTIAL | Secondary torque-splitting unit |
| 2093309071 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures cover alignment |
| 0730300820 | THRUST WASHER | Reduces axial play in differential |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to drive shaft |
| 5838300811 | THRUST WASHER | Controls gear end-play |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear in differential set |
Frequently Asked Questions
Q: Can I reuse the old gasket when installing the ZF 2093.210.034 cover?
A: No. Always replace the gasket and inspect the mating surface for warping. Reusing a gasket risks oil leaks and contamination of the 2093109024: DIFFERENTIAL.
Q: How do I know if this cover fits my ZF WG200 transmission?
A: Check the bolt pattern (8 x M12 on 180 mm PCD) and compare with your existing cover. The 2093309071: DIFF.HOUSING must also match for proper alignment.
Q: What torque specification should I use for the cover bolts?
A: Tighten to 65 Nm (48 lb-ft) in a cross-pattern sequence. Over-torquing can crack the cast iron, while under-torquing leads to leaks that damage the 0750117075: TAPER ROLLER BEARING.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
