Overview
The ZF 2093.353.001 GEAR SHIFT HOUSING is a critical structural component within the WG100, WG130, and WG131 transmission assemblies. This OEM genuine part serves as the primary mounting point for the shift mechanism, ensuring precise alignment of the selector forks and rails during gear engagement. The housing directly interfaces with the transmission casing to protect internal shift components from contamination while maintaining proper lubrication flow. When replacing this unit, it is common to also inspect the 2093109024 DIFFERENTIAL for wear, as both components share the same lubrication circuit. The SKU 2093.353.001 is manufactured to ZF’s original tolerances, guaranteeing a direct fit without modification.
Symptoms of Failure
- Oil seepage around shift tower: A cracked or warped gear shift housing often causes transmission fluid to leak from the shift rail bores, leading to low oil levels and eventual gear slipping.
- Hard shifting or gear clash: When the housing bore becomes worn, shift forks lose their precise alignment, resulting in difficult engagement or grinding noises during gear changes.
- Excessive shift lever play: A fatigued housing can develop hairline fractures around the pivot points, causing the shift lever to feel loose or sloppy during operation.
- Intermittent gear lockout: Misalignment from a deformed housing may prevent the transmission from fully engaging certain gears, particularly under load.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2093.353.001 |
| Material | High-grade aluminum alloy (A356-T6) |
| Weight | 2.85 kg (6.28 lbs) |
| Overall Length | 245 mm |
| Bolt Hole Spacing | 120 mm (center to center) |
| OEM Reference | ZF 2093.353.001 |
| Surface Treatment | Clear anodized for corrosion resistance |
Compatibility
This gear shift housing is engineered for ZF’s WG-series transmissions, specifically the WG100, WG130, and WG131 models. It is not compatible with the WG180 or WG200 series due to different bolt patterns and shift rail diameters. For transmissions in the WG130 family, verify the housing casting number matches 2093.353.001 before installation. When servicing the shift housing, always replace the 0750117075 TAPER ROLLER BEARING and inspect the 2093209095 DIFFERENTIAL for scoring. The 2093309071 DIFF.HOUSING should also be checked for cracks if the shift housing shows signs of impact damage.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109024 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shaft loads |
| 2093209095 | DIFFERENTIAL | Secondary torque distribution unit |
| 2093309071 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Secures shift fork to rail |
| 0730300820 | THRUST WASHER | Controls axial clearance in gear sets |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hub |
| 5838300811 | THRUST WASHER | Reduces friction in rotating assemblies |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear in differential set |
Frequently Asked Questions
Q: Can the ZF 2093.353.001 housing be repaired if cracked?
A: Welding is not recommended due to the risk of warping the precision bores. Replacement with this OEM genuine part is the only reliable solution for cracked housings.
Q: Does this part include the shift fork or just the housing?
A: The 2093.353.001 is the bare housing only. Shift forks, springs, and pins must be ordered separately. We recommend replacing the 0631100223 SPRING PIN simultaneously.
Q: How do I confirm this fits my WG130 transmission?
A: Check the casting number on your existing housing. If it reads 2093.353.001, this is a direct replacement. Also verify the bolt pattern matches the 120 mm spacing listed in the specifications table above.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.353.001 GEAR SHIFT HOUSING – Gear RFQ Support
PartsZF helps B2B buyers source ZF 2093.353.001 GEAR SHIFT HOUSING with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This gear page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.353.001 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: HYDR.CONTROL
- Illustration section: POWER SHIFT GROUP
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.353.001 |
|---|---|
| Normalized SKU | 2093353001 |
| Part name | GEAR SHIFT HOUSING |
| Product category | gear |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: diagram. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.128 HELICAL GEAR
- ZF 4143.316.088 PINION
- ZF 4657.302.007 INPUT GEAR
- ZF 4657.354.044 OUTPUT GEAR
- ZF 4644.306.326 GEAR SHIFT HOUSING
