Overview
The ZF 2093.298.089 MAIN CLUTCH is a critical torque-transfer component engineered specifically for the WG100, WG130, and WG131 series transmissions. This OEM genuine part sits at the input shaft interface, engaging and disengaging engine power to the gear train. The SKU 2093.298.089 ensures precise clutch modulation for smooth shifting under heavy industrial loads. When paired with a properly maintained 2093109024: DIFFERENTIAL, this main clutch delivers consistent power distribution across the driveline.
Symptoms of Failure
When the ZF 2093.298.089 main clutch begins to fail, operators often notice clutch slipping under load during acceleration or uphill travel. Another common symptom is jerky engagement when shifting from neutral to drive, which indicates worn friction surfaces. You may also detect burning clutch smell from overheated plates, often accompanied by delayed gear engagement after the pedal is released. These failure signs typically appear after extended service intervals, especially if the 0750117075: TAPER ROLLER BEARING supporting the clutch shaft has degraded.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 2093.298.089 |
| Outer Diameter | 298 mm |
| Inner Diameter | 89 mm |
| Friction Material | Sintered bronze composite |
| Weight | 4.2 kg |
| OEM Reference | ZF 2093.298.089 |
| Operating Torque | 850 Nm max |
Compatibility
This main clutch is designed for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It also fits select variants of the WG180 and WG200 series when used with the appropriate 2093209095: DIFFERENTIAL assembly. Always verify your transmission model number before installation. The clutch interfaces directly with the 2093309071: DIFF.HOUSING to ensure proper alignment and oil flow.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109024 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports clutch shaft rotation |
| 2093209095 | DIFFERENTIAL | Secondary torque split unit |
| 2093309071 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Secures clutch linkage |
| 0730300820 | THRUST WASHER | Reduces axial friction |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Prevents gear end-play |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Meshes with axle bevel gear |
Frequently Asked Questions
Q: How do I know if the ZF 2093.298.089 main clutch is worn out?
A: Look for clutch slip under heavy load, a burning smell during operation, or jerky engagement when shifting. These are clear indicators that the friction material has degraded.
Q: Can this clutch be used with the WG180 transmission?
A: Yes, the 2093.298.089 is compatible with WG180 models when used with the correct differential housing and taper roller bearing. Always cross-reference your transmission serial number.
Q: What other parts should I replace when installing this main clutch?
A: It is recommended to inspect and replace the taper roller bearing (0750117075) and thrust washers (0730300820, 5838300811) simultaneously to ensure optimal performance and prevent premature wear.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
