Overview
The ZF 2093.210.016 CLUTCH SHAFT is a precision-machined OEM genuine component engineered for the WG100, WG130, and WG131 transmission series. This shaft serves as the critical torque-transfer interface between the clutch pack and the main gear train, ensuring smooth engagement and disengagement under heavy loads. As a core rotating element, it sits directly within the transmission housing, aligning with the differential assembly to distribute power to the axles. The SKU 2093.210.016 is manufactured to ZF’s exacting tolerances, making it a direct replacement for worn or damaged units in commercial and industrial drivelines.
Symptoms of Failure
- Gear slipping under load – A worn clutch shaft spline can cause intermittent power loss, especially during acceleration or hill climbing.
- Oil leaks near the clutch housing – Degraded shaft seals or surface wear allow transmission fluid to escape, leaving visible puddles.
- Abnormal grinding or whining noise – Bearing surface deterioration on the shaft produces metallic sounds that intensify with speed.
- Hard shifting or clutch drag – A bent or fatigued shaft prevents proper clutch disengagement, making gear changes difficult.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | 2093.210.016 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 285 mm (estimated) |
| Spline Diameter | 32 mm (estimated) |
| Weight | 2.4 kg (estimated) |
| OEM Reference | ZF 2093.210.016 |
| Surface Treatment | Black oxide or phosphate coating |
Compatibility
This clutch shaft is designed for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It is also compatible with certain variants of the WG180 and WG200 series where the clutch shaft dimensions match. For precise fitment, always cross-reference your transmission’s serial number with the SKU 2093.210.016. The shaft works in concert with the 2093109028: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING to ensure stable rotation. Additionally, it interfaces with the 2093209094: DIFFERENTIAL and the 2093309078: DIFF.HOUSING to complete the power transfer assembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109028 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209094 | DIFFERENTIAL | Secondary torque distribution unit |
| 2093309078 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Secures shaft alignment |
| 0730300820 | THRUST WASHER | Reduces axial friction |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheels |
| 5838300811 | THRUST WASHER | Controls gear end-play |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Meshes with axle bevel gear |
Frequently Asked Questions
Q: How do I know if the 2093.210.016 clutch shaft is the correct part for my transmission?
A: Verify your transmission model (WG100, WG130, or WG131) and check the shaft spline count and length. The OEM number 2093.210.016 is stamped on the original shaft. If in doubt, compare dimensions with the specifications table above.
Q: Can I replace the clutch shaft without removing the entire transmission?
A: In most cases, partial disassembly of the clutch housing and differential cover is required. You will need to access the 0750117075: TAPER ROLLER BEARING and the 2093309078: DIFF.HOUSING to free the shaft. Full transmission removal is recommended for easier access.
Q: What other parts should I replace when installing a new clutch shaft?
A: It is advisable to replace the 0631100223: SPRING PIN, 0730300820: THRUST WASHER, and all seals simultaneously. Inspect the 4482360002: AXLE BEVEL GEAR and 2097309085: DIFFERENTIAL AXLE for wear to prevent future failures.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.210.016 CLUTCH SHAFT – Shaft RFQ Support
For ZF 2093.210.016 CLUTCH SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2093.210.016 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.210.016 |
|---|---|
| Normalized SKU | 2093210016 |
| Part name | CLUTCH SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
