Overview
The ZF 2093.110.093 P.T.O. SHAFT is a critical power take-off shaft engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transfers rotational energy from the transmission to auxiliary hydraulic pumps or driven equipment, ensuring seamless power distribution in heavy-duty industrial applications. As a direct replacement component, the SKU 2093.110.093 sits within the transmission’s output gear train, connecting directly to the differential assembly. For optimal drivetrain integrity, this shaft works in concert with the 2093109028: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING to maintain precise gear alignment under load.
Symptoms of Failure
- Intermittent power loss to auxiliary equipment: A worn 2093.110.093 shaft causes irregular P.T.O. engagement, leading to inconsistent hydraulic pump performance during operation.
- Metallic grinding noise from transmission housing: Excessive play in the shaft splines produces a distinct chatter or grinding sound, especially when shifting between forward and reverse gears.
- Oil seepage around the P.T.O. mounting flange: Deteriorated shaft seals allow transmission fluid to escape, leaving visible wet spots on the bell housing and reducing lubrication efficiency.
- Vibration at idle or under load: A bent or fatigued shaft creates harmonic vibrations that resonate through the chassis, often misdiagnosed as a failing 2093209094: DIFFERENTIAL.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 2093.110.093 |
| Overall Length | 245 mm |
| Spline Diameter | 28 mm (10-tooth involute) |
| Material | Case-hardened alloy steel (20MnCr5) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2093.110.093 |
| Surface Treatment | Black oxide coating |
Compatibility
This P.T.O. shaft is engineered for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It is also compatible with the WG180 and WG200 series when used in conjunction with the correct 2093309078: DIFF.HOUSING. Always verify spline count and shaft length against your transmission’s service manual before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109028 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports axial and radial shaft loads |
| 2093209094 | DIFFERENTIAL | Secondary differential for multi-axle configurations |
| 2093309078 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures shaft to coupling flange |
| 0730300820 | THRUST WASHER | Reduces axial end-play in gear stack |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Prevents gear-to-housing contact |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Provides final gear reduction in differential |
Frequently Asked Questions
Q: Can the 2093.110.093 shaft be used in a ZF WG180 transmission without modifications?
A: Yes, the shaft is mechanically compatible with WG180 models, but you must also inspect the 2093309078: DIFF.HOUSING for wear, as housing bore tolerances vary between series.
Q: How do I confirm the spline condition before installing a new P.T.O. shaft?
A: Use a spline gauge to measure the internal spline of the mating gear. If the clearance exceeds 0.15 mm, replace the corresponding 2093109028: DIFFERENTIAL to prevent premature failure.
Q: What torque specification is required for the retaining nut on this shaft?
A: The factory specification is 180 N·m for the lock nut. Always apply thread-locking compound and replace the 0631100223: SPRING PIN during reassembly to prevent loosening.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.110.093 P.T.O. SHAFT – Shaft RFQ Support
For ZF 2093.110.093 P.T.O. SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2093.110.093 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: TRA 20
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.110.093 |
|---|---|
| Normalized SKU | 2093110093 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
