ZF 0730.003.416 SHIM | OEM Genuine Part

Overview

The ZF 0730.003.416 SHIM is a precision-engineered OEM genuine spacer component designed for critical axial clearance adjustment within heavy-duty ZF transmissions used in construction machinery. This thin, durable shim sits between the transmission housing and bearing assemblies, ensuring proper preload and alignment of rotating elements. The SKU 0730.003.416 is specifically calibrated to maintain exact gear mesh tolerances, preventing unwanted movement that can lead to premature wear. When installed alongside a 2094301036: HOUSING or a 2094301071: COVER, this shim guarantees the transmission’s internal geometry remains within factory specifications, directly supporting load distribution and operational stability.

Symptoms of Failure

• Excessive axial play in the output shaft — When the 0730.003.416 shim compresses or deforms, noticeable end float develops, causing driveline vibration during acceleration or deceleration.
• Oil seepage at housing mating surfaces — Worn shim thickness alters the clamping force on seals, leading to slow leaks around the 2094101012: TRANSMISSION HOUSING joint.
• Intermittent gear clash under load — Loss of shim integrity allows gear teeth to lose proper mesh depth, producing a grinding noise specifically when shifting between forward and reverse.
• Elevated operating temperatures — Incorrect shim clearance increases bearing friction, causing the transmission to run hotter than normal, especially in demanding construction applications.

Technical Specifications

Compatibility

This shim is integral to ZF WG series transmissions commonly found in wheel loaders, excavators, and telehandlers. It is compatible with the following ZF transmission models: WG180, WG200, WG211, and WG310. The 0730.003.416 is also used in certain ZF 4WG-200 and 4WG-310 variants where precise axial shimming of the countershaft bearing is required. For complete assembly integrity, always pair this shim with a new 2094298057: HOUSING and verify the condition of the 0750111371: SHAFT SEAL during installation.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.003.416 shim used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The ZF 0730.003.416 shim is used to adjust axial clearance between bearing assemblies and the transmission housing in ZF WG series transmissions. It ensures proper gear mesh preload and prevents shaft end float in construction machinery.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if the 0730.003.416 shim needs replacement?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common signs include excessive output shaft play, oil leaks at housing joints, gear grinding during shifts, and higher than normal transmission operating temperatures. Always measure shim thickness with a micrometer during rebuilds.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the 0730.003.416 shim during a transmission rebuild?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “ZF recommends replacing the shim with a new OEM part during any major transmission overhaul. Reused shims may have work hardening or thickness loss that compromises bearing preload accuracy.”
}
}
]
}