ZF 2094.346.054 OUTPUT SHAFT for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2094.346.054 OUTPUT SHAFT is a critical torque-transmitting component located in the final drive assembly of ZF WG-series transmissions. This OEM genuine part transfers rotational force from the planetary gear set to the driveline flange, ensuring smooth power delivery under heavy loads. The SKU 2094.346.054 is precision-machined to maintain concentricity and spline engagement, directly interfacing with the TRANSMISSION HOUSING (2094101011) and the HOUSING (2094301045) to seal the output section. Without this shaft, the transmission cannot complete its power path to the wheels.

Symptoms of Failure

• Output flange oil leakage – Worn splines or a scored shaft surface allow transmission fluid to bypass the seal, often visible as drips near the rear of the gearbox.
• Vibration during acceleration – A bent or fatigued output shaft causes driveline shudder, especially between 30-50 mph under load.
• Intermittent gear slipping in top range – When the shaft’s spline teeth wear down, the connection to the planetary carrier becomes loose, leading to power loss and erratic shifting.
• Metallic debris in the oil pan – Flaking or pitting on the shaft surface generates fine metal particles, detectable during routine fluid changes.

Technical Specifications

Compatibility

This output shaft is engineered for the ZF WG100, WG130, and WG131 transmission series. It also fits select variants of the WG180 and WG200 models where the output housing configuration matches. Always verify the spline count and bearing journal dimensions against your existing shaft. For proper installation, pair this shaft with a new BALL (0635460022) for the pilot bearing and a COVER (2094301044) to seal the rear housing. Do not reuse old seals or gaskets during replacement.

Related Components