ZF 2095.268.018 SHAFT for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2095.268.018 SHAFT is a precision-machined component designed for the internal power flow within WG100, WG130, and WG131 transmission assemblies. This OEM genuine part transmits rotational torque from the input section to the planetary gear sets, ensuring synchronized engagement across all forward and reverse ratios. The SKU 2095.268.018 is engineered to exact ZF tolerances, serving as the primary rotational axis for the clutch pack and differential assembly. When paired with a 5838109007: DIFFERENTIAL, this shaft maintains proper gear alignment under heavy load conditions.

Symptoms of Failure

• Intermittent gear slippage under load: A worn shaft spline causes the clutch pack to lose engagement, resulting in sudden RPM spikes without corresponding vehicle speed increase.
• Metallic grinding noise from the transmission housing: Excessive radial play in the shaft bearing journals produces a low-frequency growl that intensifies during acceleration.
• Oil contamination with metallic particles: Surface spalling on the shaft’s hardened raceway sheds ferrous debris into the hydraulic circuit, visible during oil changes as silver glitter.
• Delayed engagement when shifting from neutral to drive: A fatigued shaft can cause the 0750117075: TAPER ROLLER BEARING to lose preload, creating a momentary lag before torque transfer.

Technical Specifications

Compatibility

This shaft is validated for use in the following ZF transmission models: WG100, WG130, and WG131. It is also mechanically compatible with the WG180 and WG200 series when used in conjunction with the correct 2095209019: DIFFERENTIAL assembly. For WG150 applications, verify the spline engagement depth before installation. The shaft interfaces directly with the 0631329086: SPRING PIN that locks the gear hub to the shaft body.

Related Components