ZF 2095.054.028 T 7115 L | OEM Genuine Part

Overview

The ZF 2095.054.028 T 7115 L is an OEM genuine part designed for the internal planetary gearset and clutch pack assembly within ZF heavy-duty powershift transmissions. This component functions as a critical friction element and sealing ring carrier, ensuring precise hydraulic pressure distribution for smooth gear engagement under high torque loads. The SKU 2095.054.028 is engineered to maintain consistent oil flow between rotating shafts and stationary housings, directly influencing shift quality and thermal stability in construction machinery transmissions. When paired with a 5838109006 DIFFERENTIAL, it helps balance load distribution across the drivetrain.

Symptoms of Failure

• Delayed or harsh gear engagement: Worn sealing surfaces cause hydraulic pressure loss, leading to sluggish shifts or sudden clunking when the transmission engages forward or reverse gears.
• Transmission overheating under load: Internal leakage from a degraded 2095.054.028 reduces lubrication efficiency, causing oil temperatures to spike during extended grading or loading cycles.
• Intermittent gear slipping on inclines: As the part loses its sealing integrity, the transmission may momentarily lose torque transfer when climbing slopes, often accompanied by a whining noise from the differential area.
• Visible oil seepage around the bell housing: Cracks or wear on the carrier can allow ATF to leak past the 0750117075 TAPER ROLLER BEARING interface, leaving drips on the undercarriage after shutdown.

Technical Specifications

Compatibility

This OEM genuine part is primarily used in ZF WG180, WG200, and WG210 series powershift transmissions found in wheel loaders, graders, and telehandlers. It also fits select ZF 4WG-200 and 6WG-200 models where the planetary carrier assembly requires a matched seal ring set. For complete axle rebuilds, always verify compatibility with the 2095209037 DIFFERENTIAL and the 2095309059 DIFF.HOUSING to ensure correct spline alignment.

Related Components