Overview
The ZF 2095.345.015 GEAR is a precision-machined helical gear designed for the planetary gearset assembly within ZF WG100, WG130, and WG131 transmissions. This OEM genuine part transmits torque from the input shaft to the intermediate shaft, directly influencing gear ratio stability and load distribution. The SKU 2095.345.015 sits in the forward clutch drum region, meshing with the sun gear to enable smooth power flow during acceleration and deceleration cycles. Constructed from case-hardened alloy steel, it ensures minimal backlash and consistent engagement under high-torque industrial applications.
Symptoms of Failure
- Whining or grinding noise during gear engagement: Worn gear teeth produce a distinct metallic whine, especially noticeable when shifting from neutral to drive or under load.
- Intermittent gear slipping under heavy load: A worn 2095.345.015 gear can cause the transmission to momentarily lose torque transfer, resulting in RPM flare without corresponding vehicle speed increase.
- Metallic debris in transmission fluid: Flaking or pitting on the gear surface sheds fine metal particles, often visible during fluid changes or on the magnetic drain plug.
- Vibration through the driveline at specific speeds: Uneven tooth wear creates harmonic vibrations, typically felt in the chassis between 40-60 km/h during coasting.
Technical Specifications
| Part Number | 2095.345.015 |
| Gear Type | Helical, 20° pressure angle |
| Number of Teeth | 34 |
| Outside Diameter | 102.4 mm |
| Bore Diameter | 28.0 mm |
| Face Width | 22.5 mm |
| Material | 20MnCr5 case-hardened steel |
| Weight | 0.68 kg |
| OEM Reference | ZF 2095.345.015 |
Compatibility
This gear is engineered for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It also fits select WG180 and WG200 variants produced between 2005-2018, provided the planetary carrier uses a 28 mm bore shaft. Always verify the spline count and tooth profile against your existing gear before installation. For differential-related assemblies, the 5838109021 DIFFERENTIAL and 2095209019 DIFFERENTIAL are frequently paired with this gear in the final drive section.
During rebuilds, the 0750117075 TAPER ROLLER BEARING supports the gear shaft, while the 0631329086 SPRING PIN secures the gear to the hub. These components must be inspected simultaneously to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109021 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial gear loads |
| 2095209019 | DIFFERENTIAL | Final drive torque splitting |
| 0631329086 | SPRING PIN | Locks gear to shaft |
| 5838300817 | THRUST WASHER | Controls axial clearance |
| 5838300682 | DIFFERENTIAL AXLE | Carries differential pinion gears |
| 5838300811 | THRUST WASHER | Reduces friction on gear faces |
| 5841302064 | THRUST WASHER | Secondary axial load bearing |
| 5838300812 | SEALING RING | Prevents fluid bypass |
| 5838300137 | OUTER CLUTCH DISK | Transfers torque in clutch packs |
ZF 2095.345.015 GEAR – Gear RFQ Support
PartsZF helps B2B buyers source ZF 2095.345.015 GEAR with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This gear page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2095.345.015 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: BEVEL DRIVE
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.345.015 |
|---|---|
| Normalized SKU | 2095345015 |
| Part name | GEAR |
| Product category | gear |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.128 HELICAL GEAR
- ZF 4143.316.088 PINION
- ZF 4657.302.007 INPUT GEAR
- ZF 4657.354.044 OUTPUT GEAR
- ZF 4644.306.326 GEAR SHIFT HOUSING
