ZF 2095.306.101 GEAR SHIFT FORK for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2095.306.101 GEAR SHIFT FORK is a precision-machined component engineered for the WG100, WG130, and WG131 transmission series. This genuine OEM part, identified by SKU 2095.306.101, sits directly within the gear selector assembly, where it engages the synchronizer sleeves to facilitate smooth gear changes. By translating the driver’s shift input into lateral movement of the sliding gears, this fork ensures positive engagement and disengagement of each gear ratio. For optimal drivetrain performance, it works in concert with the 5838109021 DIFFERENTIAL and the 0750117075 TAPER ROLLER BEARING to maintain proper shaft alignment and torque distribution.

Symptoms of Failure

• Hard shifting or gear grinding: A worn shift fork fails to fully engage the synchronizer, causing audible grinding noises during gear changes, especially under load.
• Gear pop-out or slipping: When the fork’s fork pads wear unevenly, the transmission may unexpectedly jump out of gear, creating a dangerous driving condition.
• Excessive shift lever play: A bent or cracked fork introduces slop in the shift linkage, making it difficult to find gears and leading to missed shifts.
• Metallic debris in transmission fluid: Worn fork fingers shed metal particles into the oil, which can contaminate the 2095209019 DIFFERENTIAL and accelerate bearing wear.

Technical Specifications

Compatibility

This shift fork is specifically designed for ZF’s WG-series transmissions. It is a direct fit for the following models: WG100, WG130, WG131. While primarily used in these three variants, it may also be compatible with the WG180 and WG200 series when used in conjunction with the correct 0631329086 SPRING PIN for pivot retention. Always verify your transmission’s serial number before installation. For differential-related repairs, consider inspecting the 5838300682 DIFFERENTIAL AXLE and 5838300811 THRUST WASHER simultaneously.

Related Components