Overview
The ZF 2095.259.003 INTERMEDIATE SHAFT is a critical power-transfer component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part serves as the central torque conduit between the input and output sections of the gear train, ensuring precise rotational alignment and load distribution under heavy-duty conditions. The SKU 2095.259.003 is precision-machined to maintain minimal axial play, directly influencing the longevity of adjacent assemblies such as the 2095109020 DIFFERENTIAL and the 2095209037 DIFFERENTIAL. Without this shaft, the transmission cannot sustain synchronized gear engagement, making it a non-negotiable element for drivetrain integrity.
Symptoms of Failure
- Gear grinding or delayed engagement: A worn intermediate shaft causes misalignment, leading to audible grinding when shifting between forward and reverse gears.
- Vibration under load: Excessive radial play from a fatigued shaft produces low-frequency vibrations that intensify during acceleration, often mistaken for bearing failure.
- Oil contamination with metallic debris: Surface spalling on the shaft splines sheds fine metal particles into the transmission fluid, visible during routine oil changes.
- Intermittent power loss: The shaft’s inability to maintain constant torque transfer results in momentary driveline hesitation, particularly in WG130 models under high torque.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | 2095.259.003 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 312 mm (estimated) |
| Spline Diameter | 38 mm (input side) |
| Weight | 4.2 kg (9.3 lbs) |
| OEM Reference | ZF 2095.259.003 |
| Surface Treatment | Black oxide with phosphate coating |
Compatibility
This intermediate shaft is engineered specifically for ZF WG-series transmissions, including the WG100, WG130, and WG131 models. It is also compatible with certain WG180 and WG200 variants that share the same spline geometry and bearing journal spacing. For optimal performance, always pair this shaft with the 0750117075 TAPER ROLLER BEARING and the 2095309059 DIFF.HOUSING to maintain correct preload and alignment. Verify your transmission’s serial number against ZF’s technical documentation before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2095109020 | DIFFERENTIAL | Distributes torque to output shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2095209037 | DIFFERENTIAL | Secondary torque distribution unit |
| 2095309059 | DIFF.HOUSING | Encloses differential gear set |
| 0631329086 | SPRING PIN | Secures shaft alignment during assembly |
| 0730300820 | THRUST WASHER | Controls axial clearance in gear stack |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2095309081 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Reduces friction on gear faces |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear in differential assembly |
ZF 2095.259.003 INTERMEDIATE SHAFT – Shaft RFQ Support
For ZF 2095.259.003 INTERMEDIATE SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2095.259.003 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: POWER SHIFT GROUP
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.259.003 |
|---|---|
| Normalized SKU | 2095259003 |
| Part name | INTERMEDIATE SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
