Overview
The ZF 2095.110.028 P.T.O. SHAFT is a critical power take-off shaft engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transfers rotational energy from the transmission’s internal gearing to auxiliary equipment, such as hydraulic pumps or winch drives. Positioned within the output shaft assembly, it interfaces directly with the differential housing to ensure seamless torque delivery. The SKU 2095.110.028 is precision-machined to ZF’s exacting tolerances, guaranteeing minimal backlash and long service life in heavy-duty industrial applications. When replacing this shaft, it is common to inspect the 2095109020: DIFFERENTIAL and 2095209037: DIFFERENTIAL for wear, as they share the same load path.
Symptoms of Failure
- Vibration during PTO engagement: A worn 2095.110.028 shaft often produces noticeable driveline shudder or vibration when the power take-off is activated, indicating spline wear or misalignment.
- Oil leaks near the PTO housing: Deterioration of the shaft’s sealing surface or bearing seat can cause transmission fluid to weep from the output area, leaving visible drips under the vehicle.
- Intermittent power loss to auxiliary equipment: As the shaft’s splines wear, the PTO may slip under load, causing hydraulic pumps or generators to lose pressure or speed intermittently.
- Metallic grinding noise: A failing shaft can produce a distinct grinding or clicking sound, especially when the transmission is under torque, signaling imminent failure of the 0750117075: TAPER ROLLER BEARING that supports it.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2095.110.028 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 245 mm ± 0.5 mm |
| Spline Diameter | 32 mm (10-tooth involute spline) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2095.110.028 |
| Surface Treatment | Black oxide corrosion protection |
| Hardness | 58–62 HRC (case depth 0.8 mm) |
Compatibility
This P.T.O. shaft is designed exclusively for ZF’s WG-series transmissions. Verified compatible models include WG100, WG130, and WG131. It may also fit WG180 and WG200 variants when used with the correct 2095309059: DIFF.HOUSING. Always confirm the spline count and shaft length against your transmission’s service manual before installation. For differential-related assemblies, the 2095309081: DIFFERENTIAL AXLE and 4482360002: AXLE BEVEL GEAR are frequently replaced in the same service interval.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2095109020 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports PTO shaft radial loads |
| 2095209037 | DIFFERENTIAL | Secondary differential unit for WG series |
| 2095309059 | DIFF.HOUSING | Encloses differential gears |
| 0631329086 | SPRING PIN | Secures shaft alignment |
| 0730300820 | THRUST WASHER | Reduces axial end-play |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 2095309081 | DIFFERENTIAL AXLE | Connects differential to wheel hub |
| 5838300811 | THRUST WASHER | Controls gear spacing |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear in differential set |
ZF 2095.110.028 P.T.O. SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 2095.110.028 P.T.O. SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 2095.110.028 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.110.028 |
|---|---|
| Normalized SKU | 2095110028 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
