Overview
The ZF 2095.118.005 TRAVEL POWER TAKE-OFF SHAFT is a critical driveline component engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part transfers rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or secondary drive systems, enabling mobile equipment to power attachments while in transit. As a precision-machined shaft, it interfaces directly with the 2095109019 DIFFERENTIAL assembly and the 0750117075 TAPER ROLLER BEARING to ensure smooth torque delivery. The SKU 2095.118.005 is a direct replacement for the original factory part, guaranteeing exact fitment and load capacity.
Symptoms of Failure
- Intermittent power loss to auxiliary systems – When the travel PTO shaft splines wear, the connection to the 2095209037 DIFFERENTIAL becomes loose, causing hydraulic pumps to stall under load.
- Metallic grinding noise during travel – Worn bearing journals or surface pitting produce a distinct chatter that intensifies when the transmission shifts between ranges.
- Oil seepage from the PTO housing seal area – A damaged shaft surface or misaligned 2095309059 DIFF.HOUSING interface allows transmission fluid to escape, leaving visible drips under the vehicle.
- Vibration in the driveline at highway speeds – Bent or fatigued shafts cause rhythmic shaking that can be felt through the chassis and steering wheel.
Technical Specifications
| Parameter | Value |
|---|---|
| Overall Length | 285 mm |
| Shaft Diameter (bearing seat) | 35 mm |
| Spline Count | 21 (involute) |
| Material | Case-hardened alloy steel (16MnCr5) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2095.118.005 |
| Surface Hardness | 58–62 HRC |
Compatibility
This travel power take-off shaft is designed for ZF’s WG-series powershift transmissions. It is a direct fit for the WG100, WG130, and WG131 models commonly found in agricultural tractors, telehandlers, and industrial loaders. While primarily intended for these three variants, the shaft may also be compatible with certain WG180 and WG200 configurations when used with the correct 0631329086 SPRING PIN and 0730300820 THRUST WASHER. Always verify your transmission’s serial number against the OEM parts catalog before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2095109019 | DIFFERENTIAL | Distributes torque between drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on shaft |
| 2095209037 | DIFFERENTIAL | Secondary differential for multi-axle drives |
| 2095309059 | DIFF.HOUSING | Encloses differential gear set |
| 0631329086 | SPRING PIN | Secures shaft to drive gear |
| 0730300820 | THRUST WASHER | Controls axial clearance in gear stack |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 2095309081 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Reduces friction on differential cross shaft |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Engages with axle bevel gear for final drive |
ZF 2095.118.005 TRAVEL POWER TAKE-OFF SHAFT – Shaft RFQ Support
For ZF 2095.118.005 TRAVEL POWER TAKE-OFF SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2095.118.005 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: TRA 13
- Illustration section: TRAVEL POWER TAKE OFF SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.118.005 |
|---|---|
| Normalized SKU | 2095118005 |
| Part name | TRAVEL POWER TAKE-OFF SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
