ZF 4108.138.016 FAN | OEM Genuine Part

Genuine ZF FAN (Part No. 4108.138.016). Found in: Fan. Also referenced as: 4108138016 / 4108.138.016 / 4108 138 016.

Overview

The ZF 4108.138.016 FAN is an OEM genuine component engineered for thermal management within heavy-duty construction machinery transmissions. This critical part mounts directly onto the transmission housing assembly, drawing air across the oil cooler and transmission casing to maintain optimal operating temperatures under extreme loads. As a factory-specified cooling fan, the SKU 4108.138.016 ensures consistent airflow to prevent fluid degradation and component overheating during prolonged operation in demanding environments like excavators, wheel loaders, and graders.

Symptoms of Failure

When the ZF 4108.138.016 FAN begins to wear, operators often notice distinct performance issues. Insufficient cooling capacity is a primary symptom, leading to transmission fluid temperatures exceeding normal ranges during heavy use. Abnormal vibration or wobbling from the fan assembly indicates blade imbalance or hub fatigue, which can accelerate bearing wear. Reduced airflow noise or a high-pitched whine suggests the fan is not spinning at the required RPM. Additionally, intermittent overheating during low-speed operation points directly to a failing fan that cannot maintain adequate air movement.

Technical Specifications

Specification Detail
Part Number 4108.138.016
Type Engine-Driven Cooling Fan
Material Reinforced Nylon / Glass-Fiber Composite
Outer Diameter 380 mm (14.96 in)
Hub Diameter 95 mm (3.74 in)
Number of Blades 8
Weight 0.85 kg (1.87 lbs)
OEM Reference ZF 4108.138.016

Compatibility

This genuine ZF fan is primarily used in the WG180 and WG200 series transmissions, commonly found in construction machinery from manufacturers such as Case, New Holland, and Liebherr. It also fits select WG150 and WG210 models where the cooling package shares the same mounting pattern. Always verify the fan hub pilot diameter and bolt pattern against your existing assembly before installation.

Related Components

For a complete transmission cooling system rebuild, consider these companion parts. The 4108101057 HOUSING and 4108201177 HOUSING provide the structural enclosure for the fan assembly. Secure mounting is achieved with the 0636302056 SCREW PLUG, while the 4108301304 BEARING COVER protects the fan shaft support. Below is a full list of related parts for this assembly.

Part Number Name Function
4108101057 HOUSING Encloses fan drive mechanism
4108201177 HOUSING Secondary fan housing section
0636302056 SCREW PLUG Seals housing fluid passages
4108301304 BEARING COVER Protects fan support bearing
4108306173 GASKET Seals housing mating surfaces
0750110040 SHAFT SEAL Prevents oil leakage at fan shaft
4108111051 POWER TAKE-OFF Drives auxiliary hydraulic pumps
0730106757 WASHER Spacer for fan hub mounting
0730106758 WASHER Thrust washer for fan assembly
0730106759 WASHER Lock washer for fan bolts
Section

Fan

WA WhatsApp