Overview
The ZF 6029.204.957 CABLE GENERAL is a critical actuation component engineered specifically for the WG 200 Series transmission family. This OEM genuine part serves as the primary mechanical link between the shift control mechanism and the valve body, translating driver input into precise gear selection. Located along the exterior of the transmission housing, this cable assembly ensures smooth, reliable engagement across all forward and reverse ranges. The SKU 6029.204.957 is factory-spec, guaranteeing exact fitment and durability under high-torque industrial conditions. When paired with a robust TRANSMISSION HOUSING, this cable maintains consistent tension and alignment, preventing premature wear in the shift linkage system.
Symptoms of Failure
- Erratic or delayed gear engagement: A worn 6029.204.957 cable often causes hesitation when shifting between forward and reverse, particularly under load.
- Audible clicking or grinding during shifts: Frayed internal strands or corroded sheathing produce metallic noises, indicating the cable is binding inside the conduit.
- Inability to select specific gears: If the cable stretches or snaps, operators may find the transmission stuck in neutral or unable to exit park.
- Visible oil seepage at cable entry points: Deteriorated seals around the cable allow transmission fluid to escape, often mistaken for a HOUSING leak.
Technical Specifications
| Specification | Value |
|---|---|
| OEM Part Number | 6029.204.957 |
| Overall Length (mm) | 1,245 |
| Conduit Outer Diameter (mm) | 12.7 |
| Core Material | Galvanized Steel Strand |
| Sheathing Material | Nylon-12 with PTFE Liner |
| Weight (kg) | 0.85 |
| Operating Temperature Range | -40°C to +120°C |
| OEM Reference | ZF 6029.204.957 |
Compatibility
This cable is designed primarily for the WG 200 Series transmissions, including the WG180, WG200, and WG210 variants used in heavy-duty off-highway vehicles, agricultural tractors, and material handlers. It directly interfaces with the shift tower and the SHIFT SYSTEM assembly. For proper installation, always verify the cable routing against the TYPE PLATE on your transmission to confirm series and revision level. The cable end fittings are compatible with standard clevis pins and the GROOVED STUD used for secure attachment to the shift lever.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4644101165 | TRANSMISSION HOUSING | Encloses and supports all internal gear sets |
| 4644301304 | HOUSING | Secondary casing for valve body and shift components |
| 0730365067 | TYPE PLATE | Identification tag with transmission model and serial number |
| 0631311009 | GROOVED STUD | Fastener for shift cable attachment point |
| 4644106300 | SHIFT SYSTEM | Complete shift lever and detent mechanism |
| 4644306500 | COVER PLATE | Seals the shift system access opening |
| 4644159300 | SHIFT SYSTEM | Alternate shift assembly for WG200 variants |
| 4644306560 | VALVE BLOCK | Hydraulic control manifold for shift timing |
| 4644306408 | WASHER | Thrust washer for shift shaft support |
| 4644107015 | SPEEDOMETER | Output speed sensor drive assembly |
