Overview
The ZF 4460.308.036 SPACER PLATE is a precision-machined component designed for the WG 200 Series transmission family. This OEM genuine part functions as a critical shim and alignment interface between the transmission housing and the clutch pack assembly. Installed within the hydraulic control circuit, the spacer plate ensures correct axial clearance and oil flow distribution to adjacent components. The SKU 4460.308.036 is engineered to ZF’s exacting tolerances, preventing metal-on-metal contact that can lead to premature wear. During a rebuild, this plate is often replaced alongside the 4460165051: CONSOLE and the 4460368311: CONSOLE, which mount directly to the spacer plate to support the valve body assembly.
Symptoms of Failure
When the ZF 4460.308.036 SPACER PLATE wears or becomes distorted, operators may notice these specific failure indicators:
- Oil leaks at the transmission case seam – A warped spacer plate compromises the seal between the housing and the control unit, leading to external fluid seepage.
- Erratic gear engagement or slipping – Incorrect axial clearance from a worn plate alters clutch pack stack-up, causing delayed or harsh shifts under load.
- Metallic debris in the oil pan – Friction between the spacer plate and rotating components generates fine metal particles, visible during routine fluid changes.
- Increased operating noise or vibration – A loose or cracked plate allows the 0636011429: HEXAGON SCREW and 0730100365: WASHER fasteners to loosen, creating audible rattling from the transmission bell housing.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 4460.308.036 |
| Material | High-strength carbon steel (C45E) with phosphate coating |
| Outer Diameter | 180 mm (7.09 in) |
| Inner Diameter | 120 mm (4.72 in) |
| Thickness | 3.5 mm (0.138 in) |
| Weight | 0.42 kg (0.93 lb) |
| OEM Reference | ZF 4460.308.036 (Genuine) |
| Torque Specification | 25 Nm (18.4 ft-lb) with M8 fasteners |
Compatibility
This ZF 4460.308.036 SPACER PLATE is primarily designed for the WG 200 Series transmissions, including models WG180, WG200, and WG210. It is also compatible with select ZF Ecomat 4HP and 5HP variants that share the same clutch housing architecture. The plate interfaces directly with the 4644105418: DISCONNECTION unit and the 4644305041: ADAPTER in the hydraulic circuit. For driveline applications, it works with the 4460068159: AXLE DRIVE and the 4460168651: INPUT FLANGE. Always verify your transmission serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4460165051 | CONSOLE | Mounts valve body to spacer plate |
| 4460368311 | CONSOLE | Secondary support bracket for control unit |
| 0636011429 | HEXAGON SCREW | M8 bolt for securing spacer plate |
| 0730100365 | WASHER | Flat washer for fastener load distribution |
| 4644105418 | DISCONNECTION | Hydraulic disconnect valve assembly |
| 4644305041 | ADAPTER | Converts oil flow between housing and plate |
| 4460068159 | AXLE DRIVE | Output shaft drive gear assembly |
| 4460168651 | INPUT FLANGE | Input shaft coupling flange |
| 4460368318 | FLANGE | Output flange for driveline connection |
| 4460368317 | DUST PROTECTION | Sealing cover for spacer plate cavity |
