Overview
The ZF 0730.000.696 SHIM is a precision-engineered spacer component designed for the WG 200 Series transmission family. This OEM genuine part plays a critical role in establishing the correct axial clearance between rotating assemblies and stationary housings within the gearbox. By maintaining precise end-play tolerances, the shim ensures optimal load distribution across bearings and gear sets. The SKU 0730.000.696 is often selected during rebuilds to compensate for wear in mating surfaces, preventing premature fatigue of adjacent components. Its installation is typically required when replacing a 4460165051: CONSOLE or a 4460368311: CONSOLE, as these consoles directly influence the shim’s final stack height.
Symptoms of Failure
- Excessive axial play in the output shaft — A worn or incorrect shim thickness allows the shaft to move longitudinally, causing irregular gear engagement and a knocking sensation during acceleration.
- Low-frequency humming from the transmission housing — When the shim loses its dimensional stability, bearing preload drops, generating a resonant hum that intensifies with road speed.
- Intermittent oil seepage at the console interface — A degraded shim can shift the alignment of the 0636011429: HEXAGON SCREW and 0730100365: WASHER, breaking the seal and allowing fluid to weep past the gasket.
- Hard shifting between forward gears — Incorrect end-play from a collapsed shim alters clutch pack clearance, leading to delayed or harsh engagement.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.000.696 |
| Material | Case-hardened steel (DIN 1.3505 equivalent) |
| Thickness | 0.50 mm (nominal) |
| Outer Diameter | 42.0 mm |
| Inner Diameter | 28.0 mm |
| Weight | 8 g |
| OEM Reference | ZF 0730.000.696 |
| Surface Finish | Ground, Ra ≤ 0.4 µm |
Compatibility
This shim is engineered for the ZF WG 200 Series, including models WG180, WG200, and WG210. It is also used in select variants of the WG150 and WG250 where the console stack height requires fine adjustment. Always verify the shim count during assembly; multiple 0730.000.696 units may be stacked to achieve the specified preload. For transmissions equipped with a 4644105418: DISCONNECTION unit, this shim ensures the disconnect shaft remains centered under load.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4460165051 | CONSOLE | Houses bearing and supports shim stack |
| 4460368311 | CONSOLE | Alternate console variant for WG200 |
| 0636011429 | HEXAGON SCREW | Secures console to transmission case |
| 0730100365 | WASHER | Distributes screw clamping force |
| 4644105418 | DISCONNECTION | Engages/disengages PTO drive |
| 4644305041 | ADAPTER | Converts flange mounting pattern |
| 4460068159 | AXLE DRIVE | Transfers torque to differential |
| 4460168651 | INPUT FLANGE | Connects driveshaft to transmission |
| 4460368318 | FLANGE | Output flange for WG200 series |
| 4460368317 | DUST PROTECTION | Seals flange against debris ingress |
