Overview
The ZF 6009.092.868 CONTROL UNIT is the electronic brain governing shift logic and pressure modulation within the WG210 series transmission. This OEM genuine part processes input from vehicle speed sensors and throttle position to command precise clutch engagement and gear selection. As a direct replacement for the original equipment module, the SKU 6009.092.868 interfaces directly with the TRANSMISSION HOUSING and the HOUS.FRONT SECT to ensure sealed, vibration-resistant operation. Without this control unit, the transmission cannot execute any automated shift sequence.
Symptoms of Failure
- Erratic or delayed shifting under load — When the control unit loses calibration, the WG210 may hesitate between gears or slam into gear, especially during uphill climbs or heavy hauling.
- Transmission stuck in limp mode — A failing 6009.092.868 often forces the gearbox into a single forward gear (typically 3rd or 4th) as a failsafe, accompanied by a check-engine or transmission warning light.
- Intermittent loss of reverse gear — Corroded internal circuits can cause reverse to engage only after multiple attempts or not at all, while forward gears remain functional.
- No communication with diagnostic tools — If the control unit fails completely, scan tools cannot establish a link to the transmission ECU, indicating internal board failure rather than a wiring issue.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6009.092.868 |
| OEM Reference | ZF 6009.092.868 |
| Material | Die-cast aluminum housing with sealed PCB |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 180 mm x 120 mm x 45 mm |
| Connector Type | 24-pin AMP/TE sealed connector |
| Operating Voltage | 12V / 24V DC (vehicle dependent) |
| Operating Temperature | -40°C to +125°C |
Compatibility
This control unit is specifically engineered for the ZF WG210 series, but it also cross-fits several other ZF powershift models that share the same electronic architecture. Compatible transmissions include the WG180, WG200, WG210, and WG250 series used in construction, agricultural, and material handling equipment. The unit mounts directly to the HOUSING REAR PART and the HOUSING REAR SECTION, making it a direct swap for OEM units with matching connector pinouts. Always verify your transmission serial number against the ZF parts catalog before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101079 | TRANSMISSION HOUSING | Main structural casing for gear train |
| 4657201166 | HOUS.FRONT SECT | Front section housing pump and converter |
| 4657201169 | HOUSING REAR PART | Rear housing supporting output shaft |
| 4657298104 | HOUSING REAR SECTION | Extended rear section for PTO mounting |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for housing assembly |
| 0636100801 | CAP SCREW | M10 fastener for control unit mounting |
| 4656301148 | FIXING PLATE | Retaining plate for control unit bracket |
| 4657301032 | SCREEN SHEET | Fine mesh filter for oil return circuit |
| 4657301033 | SCREEN SHEET | Coarse mesh pre-filter for suction line |
| 0636100803 | CAP SCREW | M8 fastener for housing sections |
ZF 6009.092.868 CONTROL UNIT – Control Unit RFQ Support
PartsZF supports RFQ review for ZF 6009.092.868 CONTROL UNIT in transmission control-system sourcing. The key step is confirming the part number against the machine or removed-unit evidence.
Part-Number Summary
Use ZF number 6009.092.868 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.092.868 |
|---|---|
| Normalized SKU | 6009092868 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4660.106.031 CONTROL UNIT
- ZF 4661.106.013 CONTROL UNIT
- ZF 4660.106.024 CONTROL UNIT
- ZF 4661.106.032 CONTROL UNIT
- ZF 4661.106.014 CONTROL UNIT
