ZF 4657.362.003 FLANGE SHAFT for WG210 | OEM Genuine Part

Source ZF 4657.362.003 FLANGE SHAFT through PartsZF, a focused ZF transmission parts supplier and authorized ZF parts distributor. Get fast RFQ support for shaft, documentation review, and export coordination.

Overview

The ZF 4657.362.003 FLANGE SHAFT is a critical output component engineered specifically for the WG 210 Series transmission. This OEM genuine part transmits rotational torque from the planetary gear set to the driveline, ensuring precise power delivery in heavy-duty industrial applications. As the primary interface between the transmission internals and the output yoke, the flange shaft (SKU: 4657.362.003) must maintain exacting concentricity and surface finish to prevent vibration and premature wear. It integrates directly with the 4657101042: TRANSMISSION HOUSING and is secured within the 4657201028: HOUS.FRONT SECT assembly, making it a non-negotiable element for drivetrain integrity.

Symptoms of Failure

When the ZF 4657.362.003 flange shaft deteriorates, operators typically encounter these specific failure indicators:

  • Output flange oil leakage – Worn sealing surfaces allow transmission fluid to escape past the shaft, often visible as drips near the rear housing joint.
  • Driveline vibration under load – A bent or spline-worn shaft causes noticeable shuddering during acceleration, particularly in WG210-equipped vehicles.
  • Abnormal gear engagement noise – Loose fitment between the shaft and the 4657201013: HOUSING REAR PART produces a distinct clunking sound when shifting between forward and reverse.
  • Intermittent power loss – Stripped or cracked splines on the flange shaft result in momentary torque slip, mimicking clutch failure.

Technical Specifications

Parameter Value
Part Number 4657.362.003
Material Forged alloy steel (induction-hardened splines)
Overall Length 285 mm
Flange Diameter 130 mm
Spline Count 24 (SAE standard)
Weight 4.2 kg
OEM Reference ZF 4657.362.003 (Genuine)
Torque Capacity 2,800 Nm (estimated)

Compatibility

This flange shaft is primarily designed for the ZF WG 210 Series, but it also fits select models within the WG180 and WG200 families due to shared output shaft dimensions. It is commonly found in WG210, WG200, and WG180 transmissions used in municipal trucks, construction loaders, and agricultural tractors. Always verify spline count and pilot bore diameter against your specific transmission serial number. The shaft is retained using a 0631306792: CYLINDRICAL PIN and sealed by the rear housing assembly.

Related Components

Part Number Name Function
4657101042 TRANSMISSION HOUSING Main structural casing for gear train
4657201028 HOUS.FRONT SECT Front section housing for input shaft
4657201013 HOUSING REAR PART Rear section supporting output shaft
0631306792 CYLINDRICAL PIN Alignment pin for housing assembly
0636100801 CAP SCREW Fastener for flange shaft retention
4656301148 FIXING PLATE Locking plate for shaft nut
4657301034 SCREEN SHEET Fine mesh filter for oil circuit
4657301035 SCREEN SHEET Coarse mesh pre-filter
0636100803 CAP SCREW Bolt for rear housing attachment
4656301048 OIL FEED.HOUSG. Lubrication distribution manifold

ZF 4657.362.003 FLANGE SHAFT – Shaft RFQ Support

PartsZF supports RFQ preparation for ZF 4657.362.003 FLANGE SHAFT where shaft identification and documentation review are required before ordering.

Get a Quote WhatsApp

Part-Number Summary

Use ZF number 4657.362.003 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.

Application Context

  • Illustration section: PRESSURE REGULATOR

Cross Reference Support

If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.

Specification Snapshot

ZF part number 4657.362.003
Normalized SKU 4657362003
Part name FLANGE SHAFT
Product category shaft
RFQ support Part-number lookup and documentation review
Media support Product photo or diagram review when available

Image and Documentation Notes

Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.

RFQ Checklist

  • ZF part number or OEM cross-reference number
  • Machine model, transmission model, or nameplate photo
  • Removed-part photos or visible markings
  • Quantity, destination, and documentation requirements
  • Final selection is confirmed by exact part number, machine context, and available documentation.

Related Parts

Related Lookup Hubs

Transmission Fitment

ZF 6 WG 210

Section

Pressure Regulator

WA WhatsApp