Overview
The ZF 6029.017.033 CABLE OFF-ROAD is a critical actuation component designed specifically for the WG 210 series powershift transmission. This OEM genuine cable transmits mechanical input from the operator control lever directly to the transmission valve body, enabling precise gear selection in heavy-duty off-road machinery. As part of the shift linkage assembly, the 6029.017.033 cable ensures smooth engagement and disengagement of clutch packs under high-torque conditions. For optimal housing integrity, this cable interfaces with the 4657101033: TRANSMISSION HOUSING and the 4657201027: HOUS.FRONT SECT, which provide the structural mounting points for the cable conduit. The SKU 6029.017.033 is manufactured to ZF’s original equipment tolerances, ensuring corrosion resistance and consistent cable tension over extended service intervals.
Symptoms of Failure
- Delayed or erratic gear engagement – When the 6029.017.033 cable stretches or frays, operators experience hesitation when shifting from neutral to drive or reverse, particularly under load.
- Audible clicking or binding during shift – Worn cable strands or damaged conduit liners produce a distinct metallic noise, indicating imminent failure of the off-road cable assembly.
- Inability to achieve full gear detent – A failing cable prevents the shift lever from locking into position, causing the transmission to slip out of gear during operation.
- Visible cable corrosion or kinking – Exposure to mud, water, and debris accelerates wear on the outer jacket, leading to internal friction and eventual cable seizure.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 6029.017.033 |
| Overall Length (estimated) | 1,850 mm |
| Cable Diameter | 6.0 mm |
| Conduit Outer Diameter | 12.0 mm |
| Material | Galvanized steel wire with PVC jacket |
| Weight | 0.85 kg |
| OEM Reference | ZF 6029.017.033 |
| End Fittings | Threaded M8 x 1.25 ball joint (both ends) |
Compatibility
This off-road shift cable is engineered for the ZF WG 210 series transmission, commonly found in agricultural tractors, wheel loaders, and forestry equipment. Based on its design and cable travel specifications, the 6029.017.033 is also compatible with the WG 180 and WG 200 series transmissions that share the same shift linkage geometry. The cable mounts directly to the 4657201012: HOUSING REAR PART and is secured using the 0631306792: CYLINDRICAL PIN for pivot alignment. Always verify cable routing length against your specific transmission housing configuration before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101033 | TRANSMISSION HOUSING | Main structural casing for gear train |
| 4657201027 | HOUS.FRONT SECT | Front section housing for converter |
| 4657201012 | HOUSING REAR PART | Rear housing for output shaft |
| 0631306792 | CYLINDRICAL PIN | Alignment pin for shift mechanism |
| 0636100801 | CAP SCREW | Fastener for housing assembly |
| 4656301148 | FIXING PLATE | Retains cable conduit in position |
| 4657301032 | SCREEN SHEET | Filter screen for oil return |
| 4657301033 | SCREEN SHEET | Fine mesh filter for valve body |
| 0636100803 | CAP SCREW | Bolt for cable bracket |
| 4681301040 | OIL FEED.HOUSG. | Lubrication supply tube |
