ZF 6009.065.536 CONTROL UNIT for WG210 | OEM Genuine Part

Source ZF 6009.065.536 CONTROL UNIT through PartsZF, a focused ZF transmission parts supplier and authorized ZF parts distributor. Get fast RFQ support for control unit, documentation review, and export coordination.

Overview

The ZF 6009.065.536 CONTROL UNIT is a critical electronic-hydraulic interface module designed exclusively for the WG 210 Series transmission. This OEM genuine part governs shift timing, clutch pressure modulation, and torque converter lock-up within the valve body assembly. As the brain of the gearbox, the 6009.065.536 receives input from speed sensors and the engine ECU to execute precise gear changes. It is typically mounted directly onto the TRANSMISSION HOUSING, where it interfaces with the main hydraulic circuits. The SKU 6009.065.536 is laser-etched on the unit for rapid identification during rebuilds.

Symptoms of Failure

  • Erratic shifting or gear hunting: When the control unit loses calibration, the transmission may randomly upshift or downshift under light throttle, often accompanied by a delayed engagement.
  • Torque converter shudder at highway speeds: A worn 6009.065.536 can fail to regulate lock-up pressure, causing a vibration between 45-60 mph that mimics driveline imbalance.
  • No reverse engagement with forward gears working: Internal solenoid failure within the control unit can completely disable reverse while leaving forward ratios operational, a classic sign of electronic valve body degradation.
  • Transmission stuck in limp mode (3rd gear): The unit may trigger a permanent fault code, forcing the gearbox into a single-gear safe mode until the 6009.065.536 is replaced.

Technical Specifications

Parameter Value
OEM Part Number 6009.065.536
Material Die-cast aluminum housing with NBR seals
Weight 1.85 kg (4.08 lbs)
Dimensions (L x W x H) 210 mm x 145 mm x 65 mm
Operating Voltage 12V DC (nominal)
Hydraulic Ports 6 (pressure, lube, clutch feed)
Temperature Range -40°C to +120°C
OEM Reference ZF 6009.065.536

Compatibility

This control unit is factory-calibrated for the ZF WG 210 series, but it also cross-references to earlier WG 180 and WG 200 models that share the same valve body architecture. It is commonly used in off-highway vehicles, municipal trucks, and medium-duty buses. The unit directly bolts to the HOUS.FRONT SECT and the HOUSING REAR PART, requiring a CYLINDRICAL PIN for precise alignment during installation. Always verify the transmission serial number against the 6009.065.536 revision level before ordering.

Related Components

Part Number Name Function
4657101037 TRANSMISSION HOUSING Main structural casing for gear train
4657201027 HOUS.FRONT SECT Front section enclosing converter and pump
4657201012 HOUSING REAR PART Rear section supporting output shaft
0631306792 CYLINDRICAL PIN Alignment dowel for housing assembly
0636100801 CAP SCREW M10 bolt for control unit mounting
4656301148 FIXING PLATE Retainer bracket for wiring harness
4657301032 SCREEN SHEET Fine mesh filter for valve body
4657301033 SCREEN SHEET Coarse mesh pre-filter for oil sump
0636100803 CAP SCREW M8 bolt for housing flange
4656301048 OIL FEED.HOUSG. Pressurized oil supply tube

ZF 6009.065.536 CONTROL UNIT – Control Unit RFQ Support

ZF 6009.065.536 CONTROL UNIT is treated as a control-system part-number lookup item. Send visible markings, machine details, and documentation needs for RFQ review.

Get a Quote WhatsApp

Part-Number Summary

Use ZF number 6009.065.536 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.

Application Context

  • Illustration section: LOOSE PARTS

Cross Reference Support

If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.

Specification Snapshot

ZF part number 6009.065.536
Normalized SKU 6009065536
Part name CONTROL UNIT
Product category control unit
RFQ support Part-number lookup and documentation review
Media support Product photo or diagram review when available

Image and Documentation Notes

Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.

RFQ Checklist

  • ZF part number or OEM cross-reference number
  • Machine model, transmission model, or nameplate photo
  • Removed-part photos or visible markings
  • Quantity, destination, and documentation requirements
  • Final selection is confirmed by exact part number, machine context, and available documentation.

Related Parts

Related Lookup Hubs

Transmission Fitment

ZF 6 WG 210

Section

Loose Parts

WA WhatsApp