Overview
The ZF 6009.092.188 CONTROL UNIT is a critical electro-hydraulic interface module within the WG210 series powershift transmission. This OEM genuine part governs clutch modulation, shift timing, and pressure regulation by translating electronic commands from the vehicle’s ECU into precise hydraulic actions. Mounted directly on the valve body, the control unit ensures seamless gear engagement under heavy load conditions. The SKU 6009.092.188 is factory-calibrated to ZF’s exacting tolerances, making it a direct replacement for failed units without requiring additional programming. When paired with a robust TRANSMISSION HOUSING, this control unit maintains the hydraulic integrity needed for sustained industrial operation.
Symptoms of Failure
- Erratic or delayed gear engagement: A failing control unit often causes a 2–4 second lag when shifting from neutral to drive, especially after the transmission has reached operating temperature.
- Intermittent transmission shudder: Worn solenoids inside the unit produce a pronounced vibration during low-speed forward or reverse maneuvers, mimicking torque converter issues.
- Hydraulic fluid contamination in the connector: Internal seal degradation allows ATF to migrate into the electrical harness, causing intermittent fault codes and corrosion on the HOUS.FRONT SECT interface.
- No reverse or forward gear: Complete loss of a specific gear range indicates a shorted circuit within the control unit’s pressure regulator stage.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 6009.092.188 |
| OEM Reference | ZF 6009.092.188 |
| Material | Die-cast aluminum body with NBR seals |
| Weight | 1.85 kg (4.08 lbs) |
| Dimensions (L x W x H) | 210 mm x 95 mm x 65 mm |
| Operating Voltage | 12V / 24V dual-rated |
| Max Pressure Rating | 22 bar (319 psi) |
| Connector Type | Deutsch DT04-4P |
Compatibility
This control unit is engineered specifically for the ZF WG210 series, but it also serves as a service replacement for earlier WG180 and WG200 variants when used with the correct HOUSING REAR PART. It is compatible with all WG210 sub-generations (WG210A, WG210B, WG210C) produced after 2008. The unit’s mounting pattern aligns with the standard SAE 4-bolt flange found on WG-series valve bodies. For installations requiring a precise dowel alignment, the CYLINDRICAL PIN must be inspected for wear before reassembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101034 | TRANSMISSION HOUSING | Main structural casing for gear train |
| 4657201027 | HOUS.FRONT SECT | Front section housing the pump and converter |
| 4657201012 | HOUSING REAR PART | Rear casing supporting output shaft |
| 0631306792 | CYLINDRICAL PIN | Alignment dowel for housing mating surfaces |
| 0636100801 | CAP SCREW | M10 x 30 flange bolt for housing fastening |
| 4656301148 | FIXING PLATE | Retainer for control unit mounting |
| 4657301032 | SCREEN SHEET | Fine mesh filter for valve body inlet |
| 4657301033 | SCREEN SHEET | Coarse mesh filter for return line |
| 0636100803 | CAP SCREW | M8 x 25 bolt for valve body attachment |
| 4681301040 | OIL FEED.HOUSG. | Lubrication supply tube to rear bearings |
ZF 6009.092.188 CONTROL UNIT – Control Unit RFQ Support
ZF 6009.092.188 CONTROL UNIT is treated as a control-system part-number lookup item. Send visible markings, machine details, and documentation needs for RFQ review.
Part-Number Summary
Use ZF number 6009.092.188 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.092.188 |
|---|---|
| Normalized SKU | 6009092188 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4660.106.031 CONTROL UNIT
- ZF 4661.106.013 CONTROL UNIT
- ZF 4660.106.024 CONTROL UNIT
- ZF 4661.106.032 CONTROL UNIT
- ZF 4661.106.014 CONTROL UNIT
