Overview
The ZF 6009.092.557 CONTROL UNIT is a critical electronic-hydraulic interface module designed specifically for the WG 210 Series powershift transmission. This OEM genuine part governs shift timing, clutch pressure modulation, and torque converter lock-up sequencing. Positioned on the valve body assembly within the transmission sump, the 6009.092.557 unit receives electrical signals from the vehicle ECU and converts them into precise hydraulic commands. For proper sealing and alignment, this control unit mounts directly against the 4657101039: TRANSMISSION HOUSING, ensuring oil galleries remain pressurized during operation.
Symptoms of Failure
- Erratic shift hunting under load: When the control unit loses calibration, the WG210 may cycle between gears unpredictably during uphill hauling or heavy towing.
- Delayed forward engagement from neutral: A worn 6009.092.557 often causes a 3-5 second lag before the transmission engages Drive, particularly after cold starts.
- Intermittent loss of reverse gear: Internal solenoid degradation within this control unit can cause reverse to drop out entirely, then suddenly return after a system reset.
- Transmission fault code P07xx with limp-home mode: The control unit’s pressure sensors frequently trigger diagnostic trouble codes, forcing the transmission into a single-gear safety mode.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number (SKU) | 6009.092.557 |
| OEM Reference | ZF 6009 092 557 |
| Material | Die-cast aluminum body with stainless steel solenoid cores |
| Weight | 1.85 kg (4.08 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 65 mm |
| Operating Voltage | 12V DC / 24V DC compatible |
| Seal Type | Integrated O-ring groove (requires gasket kit) |
Compatibility
This control unit is engineered for the ZF WG 210 Series transmission family. It is directly compatible with WG180, WG200, and WG210 models found in mid-range construction loaders, telescopic handlers, and agricultural tractors. The unit also cross-references to certain WG150 variants when used with the appropriate 4657201028: HOUS.FRONT SECT adapter. For rear-mounted applications, verify fitment with the 4657201013: HOUSING REAR PART to ensure proper solenoid clearance. Always secure the assembly using the 0631306792: CYLINDRICAL PIN for precise dowel alignment during installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101039 | TRANSMISSION HOUSING | Main structural casing for gear train and valve body |
| 4657201028 | HOUS.FRONT SECT | Forward section housing torque converter and pump |
| 4657201013 | HOUSING REAR PART | Rear casing supporting output shaft and PTO drive |
| 0631306792 | CYLINDRICAL PIN | Dowel pin for precise control unit alignment |
| 0636100801 | CAP SCREW | M8 bolt for securing valve body to housing |
| 4656301148 | FIXING PLATE | Retention bracket for control unit harness |
| 4657301034 | SCREEN SHEET | Fine mesh filter for valve body oil inlet |
| 4657301035 | SCREEN SHEET | Coarse mesh pre-filter for transmission sump |
| 0636100803 | CAP SCREW | M10 bolt for housing flange connection |
| 4681301040 | OIL FEED.HOUSG. | Pressurized oil supply tube to control unit |
ZF 6009.092.557 CONTROL UNIT – Control Unit RFQ Support
PartsZF supports RFQ review for ZF 6009.092.557 CONTROL UNIT in transmission control-system sourcing. The key step is confirming the part number against the machine or removed-unit evidence.
Part-Number Summary
Use ZF number 6009.092.557 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6009.092.557 |
|---|---|
| Normalized SKU | 6009092557 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4660.106.031 CONTROL UNIT
- ZF 4661.106.013 CONTROL UNIT
- ZF 4660.106.024 CONTROL UNIT
- ZF 4661.106.032 CONTROL UNIT
- ZF 4661.106.014 CONTROL UNIT
