Overview
The ZF 6057.018.263 CONTROL UNIT is a precision electronic assembly designed specifically for the WG210 series powershift transmission. This OEM genuine part governs hydraulic pressure modulation and shift timing, ensuring seamless gear engagement under heavy-duty industrial loads. Mounted directly onto the valve body within the transmission housing, the control unit interprets input signals to regulate clutch pack actuation. The SKU 6057.018.263 is factory-calibrated to ZF’s exacting tolerances, making it a direct replacement for failed units in construction, mining, and agricultural machinery. Without this component, the transmission cannot execute commanded gear changes, leading to operational downtime.
Symptoms of Failure
- Erratic gear engagement or delayed shifting: When the control unit degrades, hydraulic pressure signals become inconsistent, causing the transmission to hesitate or slam into gear. This often manifests as a “ZF transmission control unit failure delayed shifting” scenario during cold starts.
- Transmission slipping under load: A worn 6057.018.263 may fail to maintain proper clutch pressure, resulting in power loss when climbing grades or hauling heavy payloads. Operators report a distinct “WG210 slipping in forward gear” condition.
- Intermittent loss of communication with the vehicle ECU: Internal circuit board fatigue can trigger fault codes such as “transmission control unit no communication” or cause the transmission to default to a single gear. This is often misdiagnosed as a wiring harness issue.
- Hydraulic oil contamination from internal short circuits: In rare cases, a failing control unit can overheat and degrade nearby seals, introducing debris into the oil. This accelerates wear on the TRANSMISSION HOUSING and valve body components.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 6057.018.263 |
| OEM Reference | ZF 6057.018.263 |
| Material | Die-cast aluminum housing with conformal-coated PCB |
| Weight | 1.2 kg (2.65 lbs) |
| Dimensions (L x W x H) | 210 mm x 140 mm x 45 mm |
| Operating Voltage | 12V / 24V DC (auto-sensing) |
| Connector Type | 24-pin AMP Junior Timer |
| Sealing Rating | IP67 with integrated gasket |
Compatibility
This control unit is engineered for the ZF WG210 series, but its design architecture also supports select variants of the WG180, WG200, and WG250 transmissions. It is commonly installed in models such as the WG210-1, WG210-2, and WG210-3 used in forklifts, wheel loaders, and telehandlers. For proper fitment, verify that your transmission’s HOUS.FRONT SECT and HOUSING REAR PART are original ZF castings, as aftermarket housings may alter mounting hole alignment. The unit also interfaces with the HOUSING REAR SECTION on certain WG210 builds, so always cross-reference your serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101080 | TRANSMISSION HOUSING | Main structural casing for gear train and valve body |
| 4657201167 | HOUS.FRONT SECT | Front section housing torque converter and pump |
| 4657201171 | HOUSING REAR PART | Rear casing enclosing output shaft and parking brake |
| 4657298103 | HOUSING REAR SECTION | Alternate rear housing variant for extended wheelbase models |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for housing-to-control unit mating |
| 0636100801 | CAP SCREW | M8 fastener securing control unit to valve body |
| 4656301148 | FIXING PLATE | Bracket reinforcing control unit against vibration |
| 4657301034 | SCREEN SHEET | Fine mesh filter for hydraulic return line |
| 4657301035 | SCREEN SHEET | Coarse mesh pre-filter for suction line |
| 0636100803 | CAP SCREW | M10 bolt for housing rear section attachment |
ZF 6057.018.263 CONTROL UNIT – Control Unit RFQ Support
PartsZF supports RFQ review for ZF 6057.018.263 CONTROL UNIT in transmission control-system sourcing. The key step is confirming the part number against the machine or removed-unit evidence.
Part-Number Summary
Use ZF number 6057.018.263 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: LOOSE PARTS
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 6057.018.263 |
|---|---|
| Normalized SKU | 6057018263 |
| Part name | CONTROL UNIT |
| Product category | control unit |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4660.106.031 CONTROL UNIT
- ZF 4661.106.013 CONTROL UNIT
- ZF 4660.106.024 CONTROL UNIT
- ZF 4661.106.032 CONTROL UNIT
- ZF 4661.106.014 CONTROL UNIT
