Overview
The ZF 5838.110.007 P.T.O. SHAFT is a critical power take-off component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or driven equipment. Positioned within the output shaft assembly, the SKU 5838.110.007 ensures precise torque delivery and alignment, directly interfacing with the DIFFERENTIAL HOUSING to maintain driveline integrity. Its hardened steel construction resists torsional stress, making it essential for heavy-duty industrial applications where consistent power transfer is non-negotiable.
Symptoms of Failure
- Audible grinding or whining noise during PTO engagement: Worn splines on the 5838.110.007 shaft cause metal-on-metal contact, often accompanied by vibration at low RPM.
- Intermittent power loss to auxiliary equipment: A fatigued shaft can slip under load, leading to erratic hydraulic pump performance or complete disengagement.
- Oil seepage near the PTO housing seal: Cracks or surface wear on the shaft allow transmission fluid to bypass the seal, leaving visible drips beneath the vehicle.
- Difficulty engaging or disengaging the PTO lever: Bent or twisted shafts create binding within the shift fork mechanism, requiring excessive force to operate.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 5838.110.007 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 185 mm |
| Spline Diameter | 32 mm (10-tooth involute) |
| Weight | 1.45 kg |
| OEM Reference | ZF 5838.110.007 |
| Surface Treatment | Phosphate coating for corrosion resistance |
Compatibility
This P.T.O. shaft is designed exclusively for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It is not interchangeable with WG180 or WG200 variants due to differing spline counts and shaft lengths. When replacing the 5838.110.007, always inspect the TAPER ROLLER BEARING for wear, as bearing failure often accelerates shaft damage. Additionally, verify the SPRING PIN securing the shaft to the drive gear is intact to prevent catastrophic dislodgement. For complete differential rebuilds, pair this shaft with the DIFFERENTIAL assembly to restore original tolerances.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109001 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 5838300128 | DIFFERENTIAL HOUSING | Encloses gear set and lubricant |
| 0631329086 | SPRING PIN | Locks shaft to drive gear |
| 5838300129 | THRUST WASHER | Controls axial clearance in differential |
| 5838300130 | THRUST WASHER | Secondary axial spacer for gear stack |
| 5838300131 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 5838300132 | COMPENS. STUB AXLE | Compensates for axle length variation |
| 5838300133 | COMPENS. STUB AXLE | Secondary axle compensation component |
| 5838300134 | DIFFERENTIAL BEVEL GEAR | Drives side gears within differential |
ZF 5838.110.007 P.T.O. SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 5838.110.007 P.T.O. SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 5838.110.007 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 5838.110.007 |
|---|---|
| Normalized SKU | 5838110007 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
