Overview
The ZF 0501.316.179 PIPE UNION is a precision-engineered hydraulic connector designed to maintain sealed fluid pathways within the transmission lubrication and cooling circuits. Positioned between the valve body and the cooler lines, this OEM genuine part ensures uninterrupted oil flow to critical rotating assemblies. The SKU 0501.316.179 is manufactured to ZF’s exacting tolerances, preventing pressure loss that can compromise clutch pack engagement. When paired with a 2093109002: DIFFERENTIAL, this union supports consistent lubrication to the gearset, reducing thermal stress during heavy-load operations in construction machinery.
Symptoms of Failure
- Transmission fluid seepage at the union joint – A worn O-ring or cracked union body causes visible oil drips near the cooler line connection, often mistaken for a pan gasket leak.
- Erratic gear engagement under load – Reduced hydraulic pressure from a leaking pipe union leads to delayed shifts or slipping in forward/reverse gears during excavation work.
- Overheating transmission oil – A restricted or leaking union disrupts cooler flow, causing the temperature gauge to climb rapidly during extended grading or dozing cycles.
- Whining noise from the differential housing – Insufficient lubrication reaching the 2093209095: DIFFERENTIAL due to a compromised pipe union creates audible metal-on-metal contact.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0501.316.179 |
| Material | Steel with zinc-nickel plating |
| Thread Size | M16 x 1.5 (inlet) / M18 x 1.5 (outlet) |
| Overall Length | 62 mm |
| Hex Size | 19 mm |
| Weight | 0.12 kg |
| OEM Reference | ZF 0501.316.179 |
| Seal Type | Integrated O-ring (NBR 70 Shore) |
Compatibility
This pipe union is a direct-fit component for ZF WG180, WG200, and WG310 series transmissions commonly installed in wheel loaders, telehandlers, and backhoe loaders. It also services the ERGOPOWER 6-speed and ECOMIX 4-speed variants used in medium-duty construction equipment. For differential-side connections, always verify alignment with the 2093309071: DIFF.HOUSING to ensure proper thread engagement. The union interfaces directly with the 0750117075: TAPER ROLLER BEARING lubrication gallery in WG200 models.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109002 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports differential pinion shaft |
| 2093209095 | DIFFERENTIAL | Rear axle torque distribution |
| 2093309071 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Secures shift fork to rail |
| 0730300820 | THRUST WASHER | Controls axial play in planetary set |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 2097309085 | DIFFERENTIAL AXLE | Drives side gears in differential |
| 5838300811 | THRUST WASHER | Reduces friction on output shaft |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Meshes with pinion gear |
Frequently Asked Questions
Q: Can a damaged pipe union cause transmission slipping?
A: Yes. A compromised 0501.316.179 union reduces hydraulic pressure to the clutch packs, leading to delayed engagement and gear slip under load, particularly in WG180 transmissions.
Q: Is this union compatible with the ZF WG200 transmission?
A: Absolutely. The 0501.316.179 is a standard fitment for WG200 models, connecting the main pressure gallery to the cooler circuit. Always inspect the mating surface on the 2093309071: DIFF.HOUSING for corrosion before installation.
Q: What torque should be applied during installation?
A: Tighten the union to 35 Nm using a crowfoot wrench. Over-torquing can distort the sealing face and cause leaks. Replace the integrated O-ring if the union has been removed.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
