ZF 0501.317.212 WASHER | OEM Genuine Part

Overview

The ZF 0501.317.212 WASHER is an OEM genuine thrust washer engineered for precise axial load management within heavy-duty construction machinery transmissions. This critical component sits between rotating gear sets and stationary housings, preventing metal-on-metal contact that would otherwise lead to premature wear. As a factory-spec part, the SKU 0501.317.212 ensures exact dimensional tolerances required for maintaining proper gear mesh alignment and hydraulic pressure integrity. When installed alongside a 4108101140: HOUSING, this washer forms a sealed boundary that protects internal assemblies from contamination.

Symptoms of Failure

• Transmission oil seepage at housing joints: A worn 0501.317.212 washer allows pressurized fluid to bypass the seal, leaving visible drips under the bell housing during operation.
• Intermittent gear slipping under load: When the washer loses its original thickness, axial play increases, causing clutch packs to disengage momentarily during heavy excavation work.
• Metallic grinding noise during gear shifts: Failed washers permit direct contact between the 0501211694: MOTOR shaft and housing, producing a distinct high-pitched scraping sound.
• Elevated operating temperatures: Excessive friction from a collapsed washer generates heat that can be detected via infrared thermography near the output shaft area.

Technical Specifications

Compatibility

This washer is a standard fitment in ZF WG180, WG200, and WG210 series transmissions commonly used in wheel loaders, telehandlers, and graders. It also appears in select ZF Ecomat 4HP and 5HP models where a 0501314793: COVER assembly requires axial thrust support. For planetary gear sets using a 0501314799: BUSH, this washer serves as the primary wear surface between rotating and stationary components. Always verify your transmission serial number against ZF parts catalogs before ordering.

Related Components