Overview
The ZF 0501.317.767 SOLENOID VALVE is a critical electro-hydraulic actuator responsible for directing oil flow within the WG100, WG130, and WG131 transmission valve bodies. This OEM genuine part precisely modulates clutch and brake application pressures, ensuring smooth gear engagement and torque converter lock-up. The SKU 0501.317.767 directly replaces worn units to restore factory shift quality and prevent driveline damage. When paired with a properly functioning 5838109012: DIFFERENTIAL, this solenoid ensures consistent power delivery under load.
Symptoms of Failure
- Erratic or delayed gear engagement: A failing 0501.317.767 often causes harsh shifts or a noticeable lag when moving from Neutral to Drive or Reverse, especially in cold weather.
- Transmission slipping under load: Worn internal seals in the solenoid valve can cause pressure loss, leading to clutch pack slip during acceleration or hill climbing.
- Intermittent check engine or transmission warning lights: The TCM detects abnormal solenoid resistance or flow, triggering fault codes related to pressure control.
- Oil leaks at the valve body connector: Degraded O-rings on the solenoid allow ATF to seep past the electrical connector, leaving visible drips on the transmission pan.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 0501.317.767 |
| Coil Resistance (20°C) | 5.2 ± 0.3 Ω |
| Operating Pressure Range | 0–20 bar |
| Body Material | Hard-anodized aluminum with steel armature |
| Seal Material | Viton (FKM) |
| Weight | 0.28 kg (0.62 lbs) |
| Length (overall) | 85 mm |
| Connector Type | DIN 72585 (2-pin) |
Compatibility
This solenoid is engineered for the ZF WG series powershift transmissions. It is a direct fit for the WG100, WG130, and WG131 models. It may also be compatible with select WG180 and WG200 variants that share the same valve body architecture. Always verify the solenoid bore diameter and connector orientation before installation. For complete driveline rebuilds, consider inspecting the 0750117075: TAPER ROLLER BEARING and the 2093209023: DIFFERENTIAL for wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209023 | DIFFERENTIAL | Final drive torque split unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gears and bearings |
| 0631329088 | SPRING PIN | Secures shift fork or actuator linkage |
| 5838300811 | THRUST WASHER | Controls axial clearance in gear sets |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 5838300633 | AXLE | Rotates to drive wheels |
| 5838300753 | THRUST WASHER | Reduces friction between rotating parts |
| 5838300818 | THRUST WASHER | Prevents metal-to-metal contact in planetary sets |
Frequently Asked Questions
Q: Can I install the 0501.317.767 solenoid without removing the transmission?
A: Yes, in most WG100/WG130 applications the solenoid is accessible after dropping the transmission oil pan and removing the valve body cover. Always replace the filter and gasket simultaneously.
Q: How do I test if my solenoid is faulty before replacing it?
A: Measure resistance across the two pins. A reading outside 4.9–5.5 Ω indicates a shorted or open coil. You can also apply 12V DC briefly to hear a distinct click from the armature movement.
Q: Does this solenoid require calibration after installation?
A: No, the 0501.317.767 is a direct replacement. However, after installation, perform a full transmission adaptation reset using a diagnostic tool to clear learned shift adaptations.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 0501.317.767 SOLENOID VALVE – Solenoid Valve RFQ Support
PartsZF helps B2B buyers source ZF 0501.317.767 SOLENOID VALVE with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This solenoid valve page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 0501.317.767 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: HYDR.CONTROL
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 0501.317.767 |
|---|---|
| Normalized SKU | 0501317767 |
| Part name | SOLENOID VALVE |
| Product category | solenoid valve |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 0501.225.026 SOLENOID VALVE
- ZF 0501.325.280 SOLENOID VALVE
- ZF 0501.320.204 SOLENOID VALVE
- ZF 0750.132.124 SOLENOID VALVE
- ZF 5838.300.408 SOLENOID VALVE
