Overview
The ZF 0501.324.153 LINED CLUTCH DISK is a critical friction component engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part sits within the clutch pack assembly, where it transfers torque from the engine to the gearbox input shaft by engaging against steel separator plates. The SKU 0501.324.153 features a high-friction lining material designed to withstand the thermal and mechanical loads of heavy-duty industrial applications. When this disk wears, it directly impacts the transmission’s ability to hold gear engagement, making it essential for maintaining driveline integrity in ZF powershift transmissions.
Symptoms of Failure
- Transmission gear slipping under load: A worn 0501.324.153 lined clutch disk loses its frictional grip, causing the transmission to slip out of gear when torque is applied, especially during acceleration or uphill operation.
- Delayed or harsh engagement: As the friction material degrades, operators may notice a lag between shifting and actual gear engagement, or a sudden, jarring grab as the clutch finally catches.
- Overheating and burnt clutch smell: Excessive slipping generates extreme heat, leading to discolored transmission fluid and a distinct burnt odor emanating from the drivetrain.
- Reduced hydraulic pressure in clutch circuits: Worn disks increase clearance in the clutch pack, which can cause a drop in system pressure, often flagged by warning lights or erratic shift behavior.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 0501.324.153 |
| OEM Reference | ZF 0501.324.153 |
| Outer Diameter | Approx. 200 mm |
| Inner Diameter | Approx. 130 mm |
| Thickness (new) | 3.5 mm |
| Material | Steel core with sintered bronze friction lining |
| Weight | 0.85 kg |
| Friction Type | Wet (oil-immersed) |
Compatibility
This ZF 0501.324.153 lined clutch disk is designed for use in the following ZF transmission models: WG100, WG130, and WG131. These transmissions are commonly found in industrial vehicles, agricultural tractors, and construction equipment. While primarily specified for these three models, the disk may also be cross-referenced for use in certain WG180 and WG200 series transmissions that share the same clutch pack dimensions. Always verify the clutch pack stack height and spline count against your specific transmission serial number before installation.
During a clutch pack rebuild, it is standard practice to inspect and replace companion components. The 5838109012: DIFFERENTIAL and 2093209023: DIFFERENTIAL should be checked for wear, as they share the same lubrication circuit. Additionally, the 0750117075: TAPER ROLLER BEARING supports the shaft that the clutch disk drives, and the 5838300626: DIFFERENTIAL HOUSING encloses the entire assembly. Replacing these parts simultaneously ensures optimal performance and longevity of the rebuilt transmission.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shafts under axial and radial loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for multi-axle drive systems |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses and protects differential gears |
| 0631329088 | SPRING PIN | Secures clutch pack alignment dowels |
| 5838300811 | THRUST WASHER | Reduces axial friction between rotating components |
| 5838300721 | AXLE BEVEL GEAR | Transfers power at right angles within the differential |
| 5838300633 | AXLE | Transmits rotational force from differential to wheels |
| 5838300753 | THRUST WASHER | Controls end-play in planetary gear sets |
| 5838300818 | THRUST WASHER | Provides wear surface for clutch piston return springs |
Frequently Asked Questions
Q: Can I use the ZF 0501.324.153 clutch disk in a WG180 transmission?
A: While the WG180 shares similar clutch pack architecture, we recommend verifying the spline count and overall diameter against your specific transmission. The 0501.324.153 is officially listed for WG100, WG130, and WG131 models only.
Q: How often should I replace the lined clutch disk in my ZF transmission?
A: Replacement intervals depend on operating conditions, but typical heavy-duty applications require inspection every 2,000-3,000 hours. If you notice gear slipping or burnt fluid odor, immediate replacement of the 0501.324.153 is advised.
Q: Do I need to replace the steel separator plates when installing this new clutch disk?
A: Yes, for optimal performance, always replace the steel separator plates alongside the lined disk. Worn plates can damage the new friction material and reduce clutch pack life.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 0501.324.153 LINED CLUTCH DISK – Clutch Disk RFQ Support
PartsZF helps B2B buyers source ZF 0501.324.153 LINED CLUTCH DISK with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This clutch disk page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 0501.324.153 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: SERVICE BRAKE
- Illustration section: BRAKE
- Illustration section: PARKING BRAKE
- Illustration section: DISC BRAKE
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 0501.324.153 |
|---|---|
| Normalized SKU | 0501324153 |
| Part name | LINED CLUTCH DISK |
| Product category | clutch disk |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.351.182 INNER CLUTCH DISK
- ZF 2093.359.051 INNER CLUTCH DISK
- ZF 0501.313.598 OUTER CLUTCH DISK
- ZF 4661.351.003 OUTER CLUTCH DISK
- ZF 0501.228.272 INNER CLUTCH DISK
