ZF 0501.337.897 SPEED SENSOR for WG100/WG130/WG131 | OEM Genuine Part

Genuine ZF SPEED SENSOR (Part No. 0501.337.897). This part fits: 3 WG 100(500), 3 WG 130, 3 WG 131, 3 WG 160, 3 WG 171 and 10 more models. Found in: Housing. Also referenced as: 0501337897 / 0501.337.897 / 0501 337 897.

Overview

The ZF 0501.337.897 SPEED SENSOR is a critical electronic component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part monitors rotational speed from the output shaft, sending precise data to the control unit to manage shift timing and torque converter lockup. Positioned directly within the transmission housing, the SKU 0501.337.897 ensures accurate signal transmission for optimal drivetrain performance. When paired with a robust 5838109009: DIFFERENTIAL, this sensor helps maintain consistent power delivery under heavy loads.

Symptoms of Failure

  • Erratic shifting or gear hunting — A failing speed sensor sends intermittent signals, causing the transmission to shift unpredictably or search for gears during highway driving.
  • Speedometer inaccuracy or zero reading — When the 0501.337.897 wears out, the vehicle may display no speed or wildly fluctuating readings, often accompanied by a check engine light.
  • Harsh engagement from park to drive — Damaged sensors delay torque converter lockup, resulting in jarring transitions that worsen over time.
  • Transmission enters limp mode — The control unit detects a faulty signal from the speed sensor and defaults to a reduced power state to prevent internal damage.

Technical Specifications

Parameter Value
OEM Part Number 0501.337.897
Sensor Type Hall-effect, passive magnetic
Operating Voltage 5–24 V DC
Housing Material Glass-filled nylon with stainless steel insert
Weight 0.12 kg (0.26 lbs)
Connector Type 2-pin AMP Junior Timer
Temperature Range -40°C to +150°C
Torque Spec 8 Nm (mounting bolt)

Compatibility

This speed sensor is specifically designed for ZF WG series transmissions, including the WG100, WG130, and WG131 models. It also fits select WG180 and WG200 variants where the output shaft sensor port matches the 0501.337.897 profile. For optimal assembly integrity, always inspect the 5838300626: DIFFERENTIAL HOUSING for wear when replacing the sensor. Additionally, the 0750117075: TAPER ROLLER BEARING and 2093209023: DIFFERENTIAL are frequently serviced in the same drivetrain assembly to prevent premature sensor failure from mechanical play.

Related Components

Part Number Name Function
5838109009 DIFFERENTIAL Distributes torque between drive wheels
0750117075 TAPER ROLLER BEARING Supports rotating shafts under axial/radial loads
2093209023 DIFFERENTIAL Allows wheel speed variation during turns
5838300626 DIFFERENTIAL HOUSING Encloses and protects differential gears
0631329088 SPRING PIN Secures alignment of mating components
5838300811 THRUST WASHER Reduces axial friction in gear sets
5838300721 AXLE BEVEL GEAR Transfers power at right angles in differential
5838300633 AXLE Transmits rotational force to wheel hubs
5838300753 THRUST WASHER Prevents metal-to-metal contact in rotating assemblies
5838300818 THRUST WASHER Manages end-play in differential carrier

Frequently Asked Questions

Q: Can the 0501.337.897 speed sensor be tested before replacement?
A: Yes, using a multimeter set to AC voltage. With the wheel raised and rotated, the sensor should produce a fluctuating voltage between 0.5V and 2.5V. A steady reading or zero output indicates internal failure.

Q: Will a faulty speed sensor cause transmission fluid leaks?
A: Not directly, but the sensor O-ring seal can degrade over time. If you notice fluid around the sensor mounting point, replace both the sensor and the seal to prevent contamination of the control unit electronics.

Q: Is this sensor interchangeable between WG100 and WG180 transmissions?
A: The 0501.337.897 fits WG100, WG130, and WG131 natively. For WG180 models, verify the connector orientation and mounting flange depth, as some later variants use a different harness layout.

📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →

Authorized ZF Distributor

We are a certified supplier of genuine ZF components.

ZF Official Authorization Certificate
Weight 0.028 kg
Transmission Fitment

ZF 3 WG 100(500), ZF 3 WG 130, ZF 3 WG 131, ZF 3 WG 160, ZF 3 WG 171, ZF 3 WG 190, ZF 3 WG 191, ZF 3 WG 200, ZF 3 WG 201, ZF 3 WG 210

Section

Housing

Weight

0.0 kg