Overview
The ZF 0631.313.098 CYLINDRICAL PIN is a precision-engineered locating and alignment component designed for the internal gear train assemblies of heavy-duty ZF WG-series transmissions. This OEM genuine part, referenced by SKU 0631.313.098, serves as a critical dowel pin that secures planetary gear sets and shaft assemblies within the differential housing. By maintaining exact radial positioning, it prevents rotational shift under high torque loads, ensuring consistent power delivery through the drivetrain. This pin is commonly installed alongside the 5838109012: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING to form a robust load-bearing interface.
Symptoms of Failure
- Gear slipping under load: A worn or sheared cylindrical pin allows the planetary carrier to shift, causing intermittent gear engagement and power loss during acceleration.
- Metallic knocking from the transmission housing: Excessive pin clearance produces a distinct clunking sound when shifting between forward and reverse gears, often misdiagnosed as bearing failure.
- Oil contamination with fine metal particles: As the pin surface wears, microscopic steel debris enters the lubricant, accelerating wear on the 2093209023: DIFFERENTIAL assembly and adjacent thrust washers.
- Irregular gear tooth wear patterns: Misalignment caused by a deformed pin leads to uneven contact on bevel gears, visible during routine inspection as polished or pitted tooth flanks.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0631.313.098 |
| Type | Cylindrical Dowel Pin (Spring Steel) |
| Diameter | 10 mm (nominal) |
| Length | 35 mm |
| Material | Case-hardened alloy steel (HRC 58-62) |
| Weight | 22 grams |
| OEM Reference | ZF 0631.313.098 |
| Surface Finish | Phosphate coated for corrosion resistance |
Compatibility
This cylindrical pin is engineered for the ZF WG100, WG130, and WG131 series transmissions, commonly found in medium-duty trucks, buses, and construction equipment. It also fits select variants of the WG180 and WG200 models where the planetary carrier uses a 10 mm dowel pin interface. Always verify fitment by comparing the pin diameter and length against your existing 5838300626: DIFFERENTIAL HOUSING bore dimensions.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 0631329088 | SPRING PIN | Retains shift fork assemblies |
| 5838300811 | THRUST WASHER | Controls axial play in differential |
| 5838300721 | AXLE BEVEL GEAR | Transfers torque to wheel axles |
| 5838300633 | AXLE | Driveshaft connection to differential |
| 5838300753 | THRUST WASHER | Reduces friction on planetary gears |
| 5838300818 | THRUST WASHER | Spacer for output shaft assembly |
Frequently Asked Questions
Q: Can I reuse the 0631.313.098 pin during a rebuild?
A: No. This cylindrical pin is a single-use component due to its interference fit and case-hardened surface. Reuse risks shearing and internal transmission damage.
Q: Does this pin require any special tooling for installation?
A: Yes. A drift punch of matching diameter is recommended to avoid marring the pin surface. Never hammer directly on the pin head.
Q: How does this pin interact with the differential housing?
A: It aligns the planetary carrier bore with the 5838300626: DIFFERENTIAL HOUSING, preventing rotational shift that would otherwise cause gear tooth fracture.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
