Overview
The ZF 0631.329.179 SPRING PIN is a precision-engineered OEM genuine component designed for the WG100, WG130, and WG131 transmission series. This small but critical fastener secures the differential assembly within the transmission housing, ensuring that the 5838109012: DIFFERENTIAL remains properly aligned under high torque loads. As part of the Springs & Fasteners category, the SKU 0631.329.179 acts as a locating pin that prevents rotational movement of key internal components, directly supporting the 5838300626: DIFFERENTIAL HOUSING during gear engagement. Without this spring pin, the entire drivetrain assembly loses its structural integrity, leading to premature wear on adjacent parts.
Symptoms of Failure
- Transmission gear slipping under load: When the 0631.329.179 spring pin fatigues, the differential can shift slightly, causing intermittent gear disengagement during acceleration.
- Metallic rattling noise from the differential area: A worn spring pin allows the 0750117075: TAPER ROLLER BEARING to vibrate against the housing, producing a distinct clicking sound at low RPM.
- Oil seepage around the differential housing seal: A broken spring pin creates misalignment, distorting the housing gasket and causing gradual ATF leaks.
- Hard shifting between forward and reverse gears: Loss of pin tension prevents the 2093209023: DIFFERENTIAL from returning to its neutral position, resulting in delayed engagement.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number (SKU) | 0631.329.179 |
| Material | Carbon spring steel (SAE 1070) |
| Diameter (Outer) | 8.0 mm |
| Length | 32.0 mm |
| Weight | 12.5 grams |
| Surface Finish | Phosphate coated for corrosion resistance |
| OEM Reference | ZF 0631.329.179 (Genuine) |
| Hardness | HRC 45-50 |
Compatibility
This OEM spring pin is engineered for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It is also compatible with certain variants of the WG180 and WG200 series where the differential housing uses a spring-pin retention system. Always verify the part number 0631.329.179 against your transmission’s parts manual before installation. For applications requiring a similar pin, consider the 0631329088: SPRING PIN as an alternative.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports differential shaft rotation |
| 2093209023 | DIFFERENTIAL | Secondary differential for planetary gear sets |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses and protects differential gears |
| 0631329088 | SPRING PIN | Alternate spring pin for WG130 variants |
| 5838300811 | THRUST WASHER | Reduces axial friction on differential gears |
| 5838300721 | AXLE BEVEL GEAR | Transfers power from differential to axles |
| 5838300633 | AXLE | Connects differential to wheel hubs |
| 5838300753 | THRUST WASHER | Spacer for axle bevel gear alignment |
| 5838300818 | THRUST WASHER | Secondary thrust washer for differential carrier |
Frequently Asked Questions
Q: Can I reuse the 0631.329.179 spring pin after removal?
A: No. Spring pins are single-use components due to their compression-set design. Always install a new OEM pin to maintain proper clamping force on the differential housing.
Q: Does this spring pin fit the ZF WG180 transmission?
A: Yes, the WG180 uses the same differential housing retention system as the WG130. However, confirm your housing bore diameter matches the 8.0 mm pin specification before ordering.
Q: What tools are required to replace the spring pin?
A: A standard pin punch set and a soft-faced hammer are sufficient. Ensure the differential is fully supported to avoid damaging the taper roller bearing during removal.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
