Overview
The ZF 0636.100.314 CAP SCREW is a critical fastening component engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part secures key internal assemblies within the differential housing, ensuring precise clamping force to maintain gear alignment and torque transfer. The SKU 0636.100.314 is designed to withstand high shear loads and thermal cycling, preventing loosening during heavy-duty operation. When installed correctly, this cap screw works in concert with the DIFF.HOUSING to maintain structural integrity under extreme stress.
Symptoms of Failure
- Transmission oil seepage around the housing: A worn or stretched cap screw reduces clamping force, allowing lubricant to escape past the TAPER ROLLER BEARING seal.
- Gear whine or rumbling during acceleration: Loss of fastener tension permits micro-movement in the DIFFERENTIAL assembly, causing uneven tooth contact.
- Intermittent drive engagement or slipping: A fractured cap screw can lead to misalignment of the DIFFERENTIAL carrier, resulting in power loss under load.
- Metallic debris in transmission fluid: Fatigue failure of the fastener generates steel particles that contaminate the lubrication system.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | 0636.100.314 |
| Thread Size | M10 x 1.5 |
| Overall Length | 35 mm |
| Head Type | Hexagon socket (Allen) |
| Material | Alloy steel, 10.9 grade |
| Surface Finish | Zinc-plated, yellow passivated |
| Weight | 0.028 kg |
| OEM Reference | ZF 0636.100.314 |
| Torque Specification | 45 N·m + 90° |
Compatibility
This cap screw is validated for use in ZF WG100, WG130, and WG131 series transmissions. It is also compatible with select WG180 and WG200 variants that share the same differential housing bolt pattern. Always verify thread pitch and length against the original fastener. The 0636.100.314 is frequently replaced alongside the DIFFERENTIAL AXLE and AXLE BEVEL GEAR during major overhauls.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109063 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating differential assembly |
| 2093209094 | DIFFERENTIAL | Secondary torque distribution unit |
| 2093309078 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Secures shift fork position |
| 0730300820 | THRUST WASHER | Controls axial play in gear sets |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Reduces friction in planetary sets |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Provides speed differentiation between wheels |
Frequently Asked Questions
Q: Can I reuse the 0636.100.314 cap screw after removal?
A: No. This is a torque-to-yield fastener that permanently deforms during installation. Always replace with a new OEM cap screw to maintain proper clamping force.
Q: Does this cap screw fit the WG180 transmission?
A: It is compatible with WG180 variants that use the same differential housing bolt pattern. Verify by comparing thread pitch (M10 x 1.5) and overall length (35 mm) against your original fastener.
Q: What tools are required for installation?
A: Use a hex socket (Allen key) of 8 mm size. A calibrated torque wrench capable of 45 N·m is essential, followed by a 90-degree angle gauge for the final tightening stage.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
