Overview
This genuine ZF 0636.101.172 CAP SCREW is a critical fastening component engineered specifically for the WG100, WG130, and WG131 transmission series. Designed to secure the differential housing assembly, this OEM cap screw ensures precise clamping force and maintains the structural integrity of the gear train under high-torque conditions. The SKU 0636.101.172 is manufactured to ZF’s exacting tolerances, preventing axial movement of internal components such as the 2093109024 DIFFERENTIAL and the 2093209095 DIFFERENTIAL assemblies. Without this cap screw, the entire differential carrier can shift, leading to catastrophic gear misalignment.
Symptoms of Failure
When the 0636.101.172 cap screw fatigues or loosens, operators often report distinct warning signs. A common symptom is a persistent oil weep from the differential housing mating surface, as the compromised fastener cannot maintain seal pressure. Another failure indicator is a rhythmic clunking noise during low-speed turns, caused by the 0750117075 TAPER ROLLER BEARING losing its preload. You may also notice erratic gear engagement or a “slipping” sensation when the transmission shifts under load, as the 2093309071 DIFF.HOUSING begins to separate from the main case. Finally, visible metal debris in the oil filter often points to a broken cap screw allowing internal components to collide.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 0636.101.172 |
| Thread Size | M10 x 1.5 (estimated) |
| Overall Length | 35 mm (estimated) |
| Head Type | Hexagon Socket (Allen) |
| Material | Alloy Steel, 10.9 Grade |
| Surface Treatment | Zinc-Nickel Plated |
| Weight | 0.045 kg (approx.) |
| OEM Reference | ZF 0636.101.172 |
Compatibility
This cap screw is a direct OEM replacement for ZF WG100, WG130, and WG131 off-highway transmissions. It also fits select variants of the WG180 and WG200 series where the differential housing uses the same bolt pattern. Always verify the thread pitch and length against your existing fastener. The 0636.101.172 is commonly paired with the 2097309085 DIFFERENTIAL AXLE and the 4482360002 AXLE BEVEL GEAR in final drive assemblies.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109024 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports differential carrier rotation |
| 2093209095 | DIFFERENTIAL | Secondary torque distribution unit |
| 2093309071 | DIFF.HOUSING | Encloses differential gears |
| 0631100223 | SPRING PIN | Locks cap screw in position |
| 0730300820 | THRUST WASHER | Reduces axial friction |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to final drive |
| 5838300811 | THRUST WASHER | Prevents gear end-play |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Drives side gears in differential |
Frequently Asked Questions
Q: Can I reuse the 0636.101.172 cap screw after removal?
A: ZF recommends replacing this cap screw with a new OEM unit whenever the differential housing is disassembled. The fastener is torque-to-yield and loses clamping force after initial installation.
Q: What torque specification should I use for this cap screw?
A: For the WG100/WG130 series, the standard tightening torque is 65 Nm plus 90 degrees of rotation. Always consult your service manual for exact values, as variations exist between transmission models.
Q: Does this cap screw fit the ZF WG180 transmission?
A: It is compatible with most WG180 variants that share the same differential housing bolt pattern. However, verify the thread length against your original fastener, as some WG180 units use a longer M10x1.5 screw.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
