ZF 0730.000.010 SHIM for WG200 | OEM Genuine Part

Overview

The ZF 0730.000.010 SHIM is a precision-engineered adjustment component designed for the WG 200 Series transmission family. This OEM genuine part functions as a critical spacer within the planetary gearset assembly, ensuring correct axial clearance and load distribution between rotating elements. By maintaining precise end-play tolerances, the shim prevents metal-on-metal contact that can lead to premature gear wear. The SKU 0730.000.010 is manufactured to ZF’s original factory specifications, guaranteeing a direct fit without modification. When installed alongside a 4460165051: CONSOLE or a 4460368311: CONSOLE, this shim stabilizes the clutch pack housing, reducing vibration during high-torque operations.

Symptoms of Failure

• Transmission oil seepage at the bell housing: A worn or incorrectly seated shim 0730.000.010 can cause misalignment, allowing ATF to escape past the main seal. This often appears as a slow drip after extended highway driving.
• Intermittent gear slipping under load: When the shim loses its calibrated thickness, axial play increases, causing clutch packs to disengage momentarily during uphill climbs or heavy towing.
• Metallic grinding noise during 2-3 upshift: Excessive clearance from a collapsed shim permits gear teeth to clash, producing a distinct scraping sound audible from the transmission pan.
• Erratic shift timing in cold weather: A deformed shim alters hydraulic pressure paths, leading to delayed engagement until the transmission reaches operating temperature.

Technical Specifications

Compatibility

This shim is specifically engineered for the ZF WG 200 Series, including models WG180, WG200, and WG210. It is a direct replacement in transmissions built between 2008 and 2020. The 0730.000.010 also fits select ZF Ecolife variants that share the same planetary carrier architecture. For proper installation, pair this shim with a 0636011429: HEXAGON SCREW to secure the console assembly, and use a 0730100365: WASHER to distribute clamping force evenly. Always verify clearance with a dial indicator after replacement.

Related Components