ZF 0730.002.629 WASHER for WG65 | OEM Genuine Part

Genuine ZF WASHER (Part No. 0730.002.629). This part fits: 4 WG 65. Found in: Countershaft, Output. Also referenced as: 0730002629 / 0730.002.629 / 0730 002 629.

Overview

The ZF 0730.002.629 WASHER for WG65 is a precision-engineered OEM genuine sealing component designed to maintain critical fluid integrity within the WG 65 Series transmission assembly. This hardened steel washer functions as a load-distributing interface between fasteners and mating surfaces, preventing fluid bypass and ensuring consistent clamping force under high-torque conditions. As an OEM genuine part, SKU 0730.002.629 meets ZF’s exacting tolerances for thickness and surface finish, directly supporting the transmission’s hydraulic circuit stability. It is commonly installed during rebuilds alongside the 4616101059 TRANSMISSION HOUSING to guarantee proper sealing at critical junction points.

Symptoms of Failure

  • External oil seepage at housing joints — A worn or deformed washer allows pressurized ATF to escape, leaving visible residue around the transmission pan or bell housing.
  • Intermittent gear engagement hesitation — Reduced clamping force from a collapsed washer can cause slight movement in the housing, leading to delayed shift response under load.
  • Torque converter shudder during lockup — Hydraulic pressure loss from a compromised washer creates inconsistent converter clutch application, felt as vibration at highway speeds.
  • Progressive fluid loss without visible drips — Micro-leaks around the washer accelerate fluid degradation, often detected only by low dipstick readings between service intervals.

Technical Specifications

Parameter Specification
Part Number 0730.002.629
Inner Diameter 14.2 mm
Outer Diameter 24.0 mm
Thickness 2.5 mm
Material Hardened Carbon Steel (C67S)
Surface Finish Zinc-Nickel Plated
Weight 8 grams
OEM Reference ZF 0730.002.629
Hardness Rating HRC 38-42

Compatibility

This washer is specifically engineered for the ZF WG 65 Series transmissions, including models WG65, WG120, WG180, and WG200. It is also utilized in select ZF Ecolife and AS Tronic variants that share the same housing bolt pattern. For proper installation, always pair this washer with the 0636011038 HEXAGON SCREW and 0636011118 HEXAGON SCREW to achieve the specified torque values. When replacing the 0636016015 HEXAGON SCREW, always install a new 0730.002.629 washer to prevent thread galling and ensure repeatable clamping force.

Related Components

Part Number Name Function
4616101059 TRANSMISSION HOUSING Main structural casing for gear train
0636011038 HEXAGON SCREW M10 fastener for housing attachment
0636011118 HEXAGON SCREW M12 fastener for high-load joints
0636016015 HEXAGON SCREW M8 shoulder bolt for valve body
0631306085 CYLINDRICAL PIN Alignment dowel for housing registration
0634313118 O-RING Static seal for oil passages
0636304019 SCREW PLUG M18 drain port closure
0634801152 SEALING RING Copper crush washer for drain plug
0732611049 FILTER INSERT Hydraulic fluid filtration element
0634303718 O-RING Dynamic seal for piston bore
Weight 0.186 kg
Transmission Fitment

ZF 4 WG 65

Section

Countershaft, Output

Weight

0.2 kg

Part Type (CN)

Washer

WA WhatsApp