ZF 0730.005.416 SHIM | OEM Genuine Part

Overview

The ZF 0730.005.416 SHIM is a precision-engineered OEM genuine part designed to establish critical axial clearances within heavy-duty ZF transmissions used in construction machinery. This thin, hardened steel component sits between the transmission housing and bearing assemblies, compensating for manufacturing tolerances and ensuring correct gear mesh alignment. The SKU 0730.005.416 is specifically calibrated to maintain preload on planetary gear sets, preventing unwanted movement that can lead to premature wear. When installed alongside the 2094101012: TRANSMISSION HOUSING, this shim guarantees that rotating components remain properly seated under high torque loads. It works in concert with the 2094301036: HOUSING to distribute clamping forces evenly across the transmission assembly.

Symptoms of Failure

• Erratic gear engagement and slipping under load – When the 0730.005.416 shim compresses or fractures, axial play increases, causing gears to lose proper contact. This manifests as a “slipping transmission” sensation during excavation or lifting operations.
• Metallic grinding noises from the transmission housing – Worn shims allow planetary gears to contact the 2094298057: HOUSING, producing a distinct high-pitched grinding sound that worsens with RPM.
• Oil contamination with metallic particles – As the shim degrades, fine steel debris enters the lubrication system. Inspecting the magnetic drain plug reveals silver-gray sludge, indicating shim material erosion.
• Vibration during clutch pack engagement – Insufficient shim thickness causes the 2094301071: COVER to misalign, transmitting vibration through the driveline during directional shifts.

Technical Specifications

Compatibility

This shim is engineered for ZF’s WG series powershift transmissions commonly found in wheel loaders, telehandlers, and graders. It is a direct fit for the following models: WG180, WG200, WG210, and WG240. The 0730.005.416 is also used in certain ErgoPower (Ecomat) variants where axial clearance adjustment is required between the sun gear and the 2094101012: TRANSMISSION HOUSING. Always verify shim stack height when replacing the 2094301036: HOUSING or 2094298057: HOUSING to maintain factory tolerances.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “How do I know if my ZF 0730.005.416 shim needs replacement?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Key indicators include metallic grinding from the transmission housing, gear slipping under load, and metallic particles in the oil filter. Measure axial play at the output shaft; if it exceeds 0.15 mm, the shim stack likely requires adjustment.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the 0730.005.416 shim during a transmission rebuild?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “ZF recommends always installing a new OEM shim during rebuilds. The hardened steel loses its spring properties over time, and even minor deformation will alter gear preload. Always measure the clearance and select the correct thickness from the shim kit.”
}
},
{
“@type”: “Question”,
“name”: “What other parts should I replace with this shim?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “When replacing the 0730.005.416, inspect the transmission housing (2094101012) for wear, and replace the O-ring (0634303085) and gasket (2094301030) to prevent oil leaks. Also check the shaft seal (0750111371) for damage.”
}
}
]
}