ZF 0730.005.552 SHIM for WG201 | OEM Genuine Part

Overview

The ZF 0730.005.552 SHIM is a precision-engineered adjustment component designed exclusively for the WG 201 Series transmission. This OEM genuine shim sits between the transmission housing and the clutch assembly to establish critical axial clearances and preload tolerances. By compensating for manufacturing tolerances, the 0730.005.552 ensures correct gear engagement and oil flow paths. It is often replaced during a full rebuild alongside the 4644101203: TRANSMISSION HOUSING or the 4644301382: TRANSMISSION HOUSING to restore factory-specified end-play.

Symptoms of Failure

• Excessive axial play or clunking – A worn or collapsed shim allows the shaft to move longitudinally, producing a metallic knock during acceleration or deceleration.
• Oil leaks at the housing joint – When the shim degrades, the seal between the 4644301189: THREADED BUSH and the housing face can be compromised, leading to fluid seepage.
• Delayed or harsh shifting – Incorrect clearance alters clutch pack stack height, causing sluggish engagement or abrupt gear changes under load.
• Vibration at highway speeds – Loss of shim thickness permits driveline oscillation, felt as a persistent shudder in the 40–60 mph range.

Technical Specifications

Compatibility

This shim is engineered for the ZF WG 201 Series and its direct derivatives. It is commonly used in WG180, WG200, and WG211 transmissions found in off-highway trucks, loaders, and agricultural machinery. Always verify stack height requirements when pairing with the 0636302005: SCREW PLUG and the 0634306198: O-RING to prevent over-compression.

Related Components